Tachometer - Replace
If the 150-7700 Tachometer needs to be replaced, follow the following procedure.
- Record all of the setpoints. Refer to the System Operations, "Setpoints" and Testing and Adjusting, "Configuration Record".
- Remove the power supply to the tachometer.
- Remove the wires from behind the tachometer.
- Use a standard screwdriver in order to remove the three screws that are holding the tachometer in place.
Caterpillar Information System:
3054 Engine Air Inlet Heater - Test
3608 Engine Marine Monitoring System Related Components
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Senders
G3600 Engines Specifications
541, 551 and 552 Track Feller Bunchers Machine Systems Track Adjuster
G3408C and G3412C Engines Crankshaft - Install
G3408C and G3412C Engines Crankshaft - Remove
3034 Industrial Engine Breather Deflector - Remove and Install
3412C Engine Cylinder Head - Remove
G3408C and G3412C Engines Crankshaft Main Bearings - Install
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Speed Sensor - Adjust
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Service Tools
G3600 Engines Starting the Engine
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Switches
Product Identification Numbers (PIN) Location Guide Stump Grinder
2001/05/01 A New Service Kit Is Available For The 158-4344 Oil Cooler {1378}
Product Identification Numbers (PIN) Location Guide Power Module
Product Identification Numbers (PIN) Location Guide Vibratory Compactor (Work Tool)
Product Identification Numbers (PIN) Location Guide Trencher
G3408C and G3412C Engines Generator - Remove
G3408C and G3412C Engines Generator - Install
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055} Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
3054 Engine Cooling System - Inspect
3054 Engine Cooling System - Check