Track Adjuster
Show/hide table
 | |
| Illustration 1 | g01437787 |
(1) Lubricate the outside diameter and the seal groove of the piston with a 5P-0960 Grease Cartridge.
(2) Lubricate the inside diameter and the seal groove of the cylinder with a 5P-0960 Grease Cartridge.
(3) Torque for the relief valve ... 34 ± 5 N·m (25 ± 4 lb ft)
(4) Torque for the fill valve ... 34 ± 5 N·m (25 ± 4 lb ft)
(B) Installation depth of the lip type seal ... 0.5 ± 0.5 mm (0.02 ± 0.02 inch)
Caterpillar Information System:
G3408C and G3412C Engines Crankshaft - Install
G3408C and G3412C Engines Crankshaft - Remove
3034 Industrial Engine Breather Deflector - Remove and Install
3412C Engine Cylinder Head - Remove
G3408C and G3412C Engines Crankshaft Main Bearings - Install
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Speed Sensor - Adjust
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Service Tools
G3600 Engines Product Description
3034 Marine Engine - Installation Guide General Information
G3408C and G3412C Engines Crankshaft Main Bearings - Remove
G3408C and G3412C Engines Camshaft Bearings - Install
3054 and 3056 Industrial and Generator Set Engines Cylinder Liner
G3600 Engines Specifications
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Senders
3608 Engine Marine Monitoring System Related Components
3054 Engine Air Inlet Heater - Test
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Tachometer - Replace
G3600 Engines Starting the Engine
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Switches
Product Identification Numbers (PIN) Location Guide Stump Grinder
2001/05/01 A New Service Kit Is Available For The 158-4344 Oil Cooler {1378}
Product Identification Numbers (PIN) Location Guide Power Module
Product Identification Numbers (PIN) Location Guide Vibratory Compactor (Work Tool)
Product Identification Numbers (PIN) Location Guide Trencher