Speed Sensor - Adjust
Speed Sensor
The engine speed sensor sends the engine speed signal to the tachometer.
Show/hide table
Illustration 1 | g00562936 |
- Adjust the sensor's clearance from the flywheel.
- The engine is secured. Install the sensor until the sensor contacts the flywheel.
- Back off the sensor (2.5 ± 0.1 turns).
- Measure clearance between the flywheel and the electronic sensor (1). The clearance should be 1.55 mm (0.061 inch) to 1.83 mm (0.072 inch).
- Tighten locknut (2) to a torque of 45 ± 7 N·m (33 ± 5 lb ft).
Caterpillar Information System:
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Service Tools
G3600 Engines Product Description
3034 Marine Engine - Installation Guide General Information
G3408C and G3412C Engines Crankshaft Main Bearings - Remove
G3408C and G3412C Engines Camshaft Bearings - Install
3054 and 3056 Industrial and Generator Set Engines Cylinder Liner
G3408C and G3412C Engines Camshaft - Install
3608 Engine Marine Monitoring System Alarms and Shutdowns
G3408C and G3412C Engines Camshaft - Remove
3608 Engine Marine Monitoring System Customer Options
3412C Engine Valve Mechanism Cover Base - Remove and Install
3608 Engine Marine Monitoring System Remote Operation
G3408C and G3412C Engines Crankshaft Main Bearings - Install
3412C Engine Cylinder Head - Remove
3034 Industrial Engine Breather Deflector - Remove and Install
G3408C and G3412C Engines Crankshaft - Remove
G3408C and G3412C Engines Crankshaft - Install
541, 551 and 552 Track Feller Bunchers Machine Systems Track Adjuster
G3600 Engines Specifications
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Senders
3608 Engine Marine Monitoring System Related Components
3054 Engine Air Inlet Heater - Test
3606, 3608, 3612, 3616 and 3618 Engines Tachometer Tachometer - Replace
G3600 Engines Starting the Engine