CID 0164 FMI 00 High Injector Actuation Pressure
产生此代码的情况:
电子控制模块(ECM)检测到喷油作动压力超过24000 kPa (3500 psi)的情况。
注: 诊断编码指示出现了机械故障。 ECM和电子控制系统操作正确。
系统响应:
ECM将功率输出限制在89.5 kW (120.0 hp)以下。
发动机可能会出现功率低的现象。
注: 该故障可能只在工作温度下出现。
测试步骤 1. 进行以下的诊断步骤: 喷油作动压力系统 - 测试
结果:
- 故障被排除 - 停止
Caterpillar Information System:
Marine Monitoring System II Customer Options
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Starting Motor System
3054E and 3056E Industrial Engines After Stopping Engine
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Injection Actuation Pressure Control Valve Circuit - Test
G3516B and G3520B Generator Set Engines Vibration Damper - Remove and Install
2001/02/01 Reman Cylinder Head Kits Are Now Available {1100}
3500B High Displacement Generator Set Engines Cooling System Operation
2001/02/01 Reman Cylinder Head Kits Are Now Available {1100}
2000/12/01 New Cylinder Head Gasket for C-10and C-12 Truck Engines {1124}
SPP101 Skid Mounted Pumper Gauges and Indicators
3126B Industrial Engine Aftercooler - Test
C15 and C18 Engines for Caterpillar Built Machines Fuel System - Prime
Exhaust Temperature Scanner Combination Locks
C-15 and C-16 Industrial Engines Alternator and Regulator
Exhaust Temperature Scanner Calibration (Scanner)
G3516B and G3520B Generator Set Engines Fuel Control Actuator - Remove and Install
2001/01/01 Caterpillar Part Numbers For Woodward Electronic Governor Controls {1264}
3406E and 3456 Generator Set Engines Cylinder Liner
C-15 and C-16 Industrial Engines Air Inlet Elbow
2001/01/01 A New Special Instruction, REHS0923 , "Assembly And Calibration Procedures For Rack Position Sensors" Is Available {1911, 1911}
3500B Industrial Engines MID 036 - CID 0102 - FMI 00 Boost Pressure above normal
3500B Industrial Engines MID 036 - CID 0102 - FMI 01 Boost Pressure below normal
Marine Monitoring System II Battery - Replace
C-10 and C-12 Industrial Engines Rear Power Take-Off (RPTO)