 | |
| Illustration 1 | g00764157 |
Typical normal displays (1) Cylinder temperature (2) Turbocharger inlet temperature (3) Turbocharger outlet temperature | |
Note: The display will scroll automatically if the "AUTOSCAN" is set to "YES". Otherwise, the operator must scroll through the display manually. For information on configuring the "AUTOSCAN", refer to Systems Operation, "System Configuration Parameters".
During normal operation, the top line of the display scrolls through all of the configured cylinder temperatures. The average of the cylinder temperatures is displayed on the bottom line.
Note: The temperatures can be displayed in units of °C or of °F. For information on configuring the "UNITS", refer to Systems Operation, "System Configuration Parameters".
The display also scrolls through all of the temperatures that are configured for the turbochargers. "TI" represents the turbocharger exhaust inlet. "TO" represents the turbocharger exhaust outlet.
The display scrolls through the channels in numerical order at the rate of approximately two seconds per channel. The process is repeated continuously.