Water Pump - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Fasten a hoist to Tool (A) and position water pump (10). Install gasket (17) on each side of the water pump.
Show/hide table
Illustration 2 g00763834 - Install bolts (7) and (8) that fasten the flange and tubes to water pump (10). Install bolts (9).
Show/hide table
Illustration 3 g00763764 - Remove Tool (A) from electric motor (6). Install two eyebolts.
Show/hide table
Illustration 4 g00763701 - Install wires (2), (3), (4), and (5).
Show/hide table
Illustration 5 g00763525 - Install cover (1) on the electric motor.
Show/hide table
Illustration 1 | g00764055 |
Installing the Electric Motor on the Water Pump
- Put electric motor (6) on the water pump and install bolts (16). Remove Tool (A) from electric motor (6). Install two eyebolts.
Show/hide table
Illustration 7 g00764129 - Put shim (13) in position on the water pump shaft. Install coupling (14) with bolts (15). Remove shim (13).
Show/hide table
Illustration 8 g00763928 - Install cover (11) with two screws (11).
- Install shim (13).
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct procedure.
Show/hide table
Illustration 6 | g00763976 |
Caterpillar Information System:
2000/12/25 Correction to Service Magazine, SEPD0544, "Harness Repair of Alternator R-Terminal Connector" {1405}
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Cylinder Head Valves
2000/12/01 Harness Repair of Alternator R-Terminal Connector {1405}
3054 and 3056 Industrial and Generator Set Engines Engine Vibration Troubleshooting
Exhaust Temperature Scanner Wiring
2000/12/01 Harness Repair of Alternator R-Terminal Connector {1405}
C-10 and C-12 Industrial Engines Gear Group (Front) - Time
3500B Generator Sets Model View Illustrations
Exhaust Temperature Scanner Thermocouples
2000/12/18 Correction to Service Magazine, SEPD0544, "Repair Parts Available for Alternator R-Terminal" {1405}
C-15 and C-16 Industrial Engines Muffler
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Voltage Connections
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft
G3516B and G3520B Generator Set Engines Water Temperature Regulators - Remove
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System Sensor Dynamic Operation
Exhaust Temperature Scanner Normal Operation
3516B Power Package Reference Material
3126E and 3126B Commercial and Truck Engines Serial Number Plate
Exhaust Temperature Scanner Keypad - Overview
3406E and 3456 Industrial Engines Aftercooler - Test
3512B HD SR500 Generator Sets Reference Information
3126E and 3126B Commercial and Truck Engines Information Plate
Exhaust Temperature Scanner Start-up Sequence
3054 Engine Gear Group (Front) - Time