Belt Tightener - Install
Installation Procedure
- Position belt tightener (2) on the engine.
Show/hide table
 | |
| Illustration 1 | g01028331 |
- Install bolts (1) .
- Adjust the tension of the V-belt. Refer to Operation and Maintenance Manual for adjustment.
Caterpillar Information System:
3126B Industrial Engine Engine Oil Pan - Remove and Install
3126B Industrial Engine Air Inlet Heater - Remove and Install
3126B Industrial Engine Fuel Filter Base - Remove and Install
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Emergency Stop Switch
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets ECM/Personality Module
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Digital Sensor Supply
C-15 and C-16 Industrial Engines Engine Oil Pan
C-15 and C-16 Industrial Engines Gauges and Indicators
3054 and 3056 Industrial and Generator Set Engines Fuel System Pressure - Test
3500B Engines Turbocharger
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Cat Data Link
3054, 3054B and 3056 Marine Engines Fuel System - Prime
3126B Industrial Engine Belt Tightener - Remove
3126B Industrial Engine Vibration Damper and Pulley - Remove and Install
C-10 and C-12 Industrial Engines Air Inlet and Exhaust System
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Sensor Open/Short Test
C-15 and C-16 Industrial Engines Water Lines
C-10 and C-12 Industrial Engines Lubrication System
3126B Industrial Engine Water Pump - Assemble
3054, 3054B and 3056 Marine Engines Engine Valve Lash - Inspect/Adjust
C32 Petroleum Engines Diagnostic Flash Code Retrieval
3054 Engine Cylinder Head - Inspect
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Speed/Timing Sensor
3126B Industrial Engine Engine Oil Pressure Sensor - Test