C-15 and C-16 Industrial Engines Caterpillar

Engine Design

Usage:

MTC855 818

BEM-UP

Show/hide table




Illustration 1	g00284836
Cylinder and valve location (A) Inlet. (B) Exhaust.

Bore ... 137 mm (5.4 inch)

Stroke ... 165 mm (6.5 inch)

Displacement ... 14.6 L (893 in³)

Cylinder Arrangement ... In-Line

Valves per Cylinder ... 4

The Adjustment For The Inlet Valve Lash is the Following Value. ... 0.38 mm (0.015 inch)

The Adjustment For The Exhaust Valve Lash is the Following Value. ... 0.76 mm (0.030 inch)

Firing Order (Injection Sequence) ... 1, 5, 3, 6, 2, 4

Crankshaft rotation ... counterclockwise

Note: The front end of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.

BFM-UP

Show/hide table




Illustration 2	g00284836
Cylinder and valve location (A) Inlet. (B) Exhaust.

Bore ... 140.0 mm (5.5 inch)

Stroke ... 171.0 mm (6.7 inch)

Displacement ... 15.8 L (964 in³)

Cylinder Arrangement ... In-Line

Valves per Cylinder ... 4

The Adjustment For The Inlet Valve Lash is the Following Value. ... 0.38 mm (0.015 inch)

The Adjustment For The Exhaust Valve Lash is the Following Value. ... 0.76 mm (0.030 inch)

Firing Order (Injection Sequence) ... 1, 5, 3, 6, 2, 4

Crankshaft rotation ... counterclockwise

Note: The front end of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.

Caterpillar Information System:

2000/12/01 A New Hose Assembly Is Used In The Water Lines Group {1380}

3054 Engine Belt Tension Chart

C-10 and C-15 Petroleum Engines Intermittent Low Power or Power Cutout

3054 Engine Belt Tension Chart

3054 and 3056 Marine Generator Set Engines Fuel Transfer Pump - Remove

3054 and 3056 Marine Generator Set Engines Fuel Transfer Pump - Install

3054 and 3056 Industrial and Generator Set Engines Vibration Damper - Check

2001/04/01 Remanufactured Governor Actuator Assemblies Are Available {1716}

3054, 3054B and 3056 Marine Engines Fuel System

3054 Engine Exhaust Temperature - Test

320D and 323D Excavators Machine System Specifications Bucket Cylinder Lines

C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Coolant Temperature Is Too High

3176C and 3196 Engines for Caterpillar Built Machines E015 High Engine Coolant Temperature Derate

797 Off-Highway Truck Power Train Pressure Sensor (Differential Oil)

797 Off-Highway Truck Power Train Bypass Switch (Differential Oil Filter)

797 Off-Highway Truck Power Train Pressure Switch (Final Drive Oil)

2001/01/01 A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}

2001/01/08 A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}

G3516B and G3520B Generator Set Engines Camshaft - Remove

C-15 and C-16 Industrial Engines Electric Starting Motor

725 and 730 Articulated Trucks Power Train Torque Converter

Marine Monitoring System II System Tests

Marine Monitoring System II Overspeed Verification Test

Marine Monitoring System II Performance Tests