3054, 3054B and 3056 Marine Engines Caterpillar


Engine Design

Usage:

3056 CKS

3054 Engine



Illustration 1g00774292
Cylinder and valve location
(A) Exhaust valve
(B) Inlet valve
(C) Flywheel end of the engine
(D) Front of the engine

Bore ... 100 mm (3.937 inch)

Stroke ... 127 mm (5.000 inch)

Displacement ... 4.0 L (244 in3)

Cylinder arrangement ... In-line

Type of combustion ... Direct injection

Compression ratio

Turbocharged engines ... 17.25:1

Number of cylinders ... 4

Valves per cylinder ... 2

Valve lash

Inlet valve ... 0.20 mm (0.008 inch)
Exhaust valve ... 0.45 mm (0.018 inch)

Firing order ... 1, 3, 4, 2

When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction: ... Clockwise

When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction: ... Clockwise

The front of the engine is opposite the flywheel end of the engine. The left side of the engine and the right side of the engine are determined from the flywheel end. No. 1 cylinder is the front cylinder of the engine.

3054B Engine



Illustration 2g00774292
Cylinder and valve location
(A) Exhaust valve
(B) Inlet valve
(C) Flywheel end of the engine
(D) Front of the engine

Bore ... 103 mm (4.055 inch)

Stroke ... 127 mm (5.000 inch)

Displacement ... 4.2 L (258 in3)

Cylinder arrangement ... In-line

Type of combustion ... Direct injection

Compression ratio

Naturally aspirated engines ... 18.5:1

Number of cylinders ... 4

Valves per cylinder ... 2

Valve lash

Inlet valve ... 0.20 mm (0.008 inch)
Exhaust valve ... 0.45 mm (0.018 inch)

Firing order ... 1, 3, 4, 2

When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction: ... Clockwise

When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction: ... Clockwise

The front of the engine is opposite the flywheel end of the engine. The left side of the engine and the right side of the engine are determined from the flywheel end. No. 1 cylinder is the front cylinder of the engine.

3056 Engine



Illustration 3g00758352
Cylinder and valve location
(A) Exhaust valves
(B) Inlet valves
(C) Flywheel end of the engine
(D) Front of the engine

Bore ... 100 mm (3.937 inch)

Stroke ... 127 mm (5.000 inch)

Displacement ... 6.0 L (366 in3)

Cylinder arrangement ... In-line

Type of combustion ... Direct injection

Compression ratio

Naturally aspirated engines ... 16.5:1
Turbocharged engines ... 16:1

Number of cylinders ... 6

Valve per cylinder ... 2

Valve lash

Inlet valve ... 0.20 mm (0.008 inch)
Exhaust valve ... 0.45 mm (0.018 inch)

Firing Order ... 1, 5, 3, 6, 2, 4

When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction: ... Clockwise

When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction: ... Clockwise

The front of the engine is opposite the flywheel end of the engine. The left side of the engine and the right side of the engine are determined from the flywheel end. No. 1 cylinder is the front cylinder of the engine.

Caterpillar Information System:

2000/12/01 A New Integral Seal Is Being Used In The Water Lines Groups {1380}
3054, 3054B and 3056 Marine Engines Fuel Shutoff Solenoid - Remove and Install - Bosch and Delphi Fuel Injection Pumps
3126B Industrial Engine Fuel Filter and Water Separator
2000/12/01 Engine Troubleshooting Guides Are Available For Gas Engines {1000}
G3304 and G3306 Engines Coolant Level Sensor
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Model View Illustrations
Marine Monitoring System II Reference Parts Information
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Description
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System System Inoperable
3126B and 3126E On-highway Engines Rear Power Take-Off (RPTO) - Install
Marine Monitoring System II Central Processing Unit Fatal Error
3126B and 3126E On-highway Engines Rear Power Take-Off (RPTO) - Remove
3054, 3054B and 3056 Marine Engines General Information
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Coolant Temperature Is Too High
320D and 323D Excavators Machine System Specifications Bucket Cylinder Lines
3054 Engine Exhaust Temperature - Test
3054, 3054B and 3056 Marine Engines Fuel System
2001/04/01 Remanufactured Governor Actuator Assemblies Are Available {1716}
3054 and 3056 Industrial and Generator Set Engines Vibration Damper - Check
3054 and 3056 Marine Generator Set Engines Fuel Transfer Pump - Install
3054 and 3056 Marine Generator Set Engines Fuel Transfer Pump - Remove
3054 Engine Belt Tension Chart
C-10 and C-15 Petroleum Engines Intermittent Low Power or Power Cutout
3054 Engine Belt Tension Chart
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.