Flywheel
Show/hide table
Illustration 1 | g01391942 |
Typical example |
For the procedure to inspect the flywheel, refer to Systems Operation/Testing and Adjusting.
Note: Before assembly, lubricate threads of the bolts with clean engine oil, molybdenum disulfide or graphite base lubricant.
(1) Torque for 12 bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) Install the flywheel ring gear with the chamfer on the teeth in the direction which is shown in Illustration 1.
Maximum temperature for installation of the ring gear ... 320 °C (608 °F)
Caterpillar Information System:
3126B and 3126E On-highway Engines 0253-02 Check Customer or System Parameters (56)
2000/08/01 Additional Serviceable Components Are Available For The Caterpillar Ignition System (CIS) {1550}
3126B Engine for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal
CPT372 Truck Mounted Pumper Reference Information
3126B and 3126E On-highway Engines 0190-02 Primary Engine Speed Loss of Signal (34)
3126B and 3126E On-highway Engines 0253-14 Truck Manufacturer Parameter Not Programed
JF Series Starting Motor General Information
3126B and 3126E On-highway Engines 0190-11 Primary Engine Speed no pattern (34)
3406E, C-10 and C-12 Truck Engines Compression Brake
3126B and 3126E On-highway Engines 0164-11 Injection Actuation Pressure system fault (39)
3126B and 3126E On-highway Engines 0164-04 Injection Actuation Pressure voltage low (15)
3126B and 3126E On-highway Engines 0164-03 Injection Actuation Pressure voltage high (15)
325D and 329D Excavators Work Tool Control (Two-Way Flow) - If Equipped
657E Wheel Tractor-Scraper Hydraulic System Pressure Reducing Valve (Implement Pilot)
3126B and 3126E On-highway Engines 0042-11 Injection Actuation Pressure output fault
3406E Truck Engine Electric Starting Motor
2000/09/01 Optional Oil Mist Detector Groups Are Available {1336}
SPS342 Skid Mounted Pumper Cold Weather Starting
3406E Truck Engine Electrical Ground Stud
2000/08/01 Software Available For Programming Allen-Bradley Programmable Logic Controller (PLC) {1000, 7620}
G3406 Engines Stub Shaft (Rear)
Oil Mist Detectors Commissioning Procedure
G3408C and G3412C Engines Engine Design
G3408C and G3412C Engines Gas Engine Ignition