Additional Serviceable Components Are Available For The Caterpillar Ignition System (CIS) {1550}
- Engines:
- G3606 (S/N: 3XF)
- G3608 (S/N: 4WF)
- G3612 (S/N: 1YG)
- G3616 (S/N: 4CG)
The illustration and the table identify the additional serviceable components in the CIS.
Show/hide table
 | |
| Illustration 1 | g00731507 |
This illustration identifies the additional serviceable components in the CIS. | |
Show/hide table
| Identification of the Additional Serviceable Components In the CIS | |||
| Item | Qty. | Part Number | Description |
| (1) | 6 | 173-1021 | Cover Clamp |
| (2) | 1 | 173-1020 | Cover Gasket |
| (3) | 6 | 173-1022 | Cover Clamp Screw (1) |
| (4) | 4 | 8T-5393 | Bolt |
| (5) | 2 | 124-3548 | Fuse (30 Amp) (2) |
| (6) | 4 | 188-3288 | Shock Mount |
| (7) | 4 | 6V-6168 | Nut |
| (8) | 8 | 8T-4224 | Washer |
Show/hide table
| ( 1 ) | Tighten the screws (3) in order to evenly compress the cover gasket (2) . |
| ( 2 ) | The CIS cover must be removed for access to the fuses (5) . |
Note: The cover gasket (2) and the shock mounts (6) should be inspected after 10,000 hours of operation. Replace these components if it is necessary.
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal
CPT372 Truck Mounted Pumper Reference Information
3126B and 3126E On-highway Engines 0190-02 Primary Engine Speed Loss of Signal (34)
3126B and 3126E On-highway Engines 0253-14 Truck Manufacturer Parameter Not Programed
JF Series Starting Motor General Information
3126B and 3126E On-highway Engines 0190-11 Primary Engine Speed no pattern (34)
3406E, C-10 and C-12 Truck Engines Compression Brake
3126B and 3126E On-highway Engines 0164-11 Injection Actuation Pressure system fault (39)
3126B and 3126E On-highway Engines 0164-04 Injection Actuation Pressure voltage low (15)
3126B and 3126E On-highway Engines 0164-03 Injection Actuation Pressure voltage high (15)
3126B and 3126E On-highway Engines 0164-02 Injection Actuation Pressure Signal Erratic (15)
3126B and 3126E On-highway Engines 0164-00 Excessive Injection Actuation Pressure (17)
3126B and 3126E On-highway Engines 0253-02 Check Customer or System Parameters (56)
G3408 and G3412 Engines Flywheel
325D and 329D Excavators Work Tool Control (Two-Way Flow) - If Equipped
657E Wheel Tractor-Scraper Hydraulic System Pressure Reducing Valve (Implement Pilot)
3126B and 3126E On-highway Engines 0042-11 Injection Actuation Pressure output fault
3406E Truck Engine Electric Starting Motor
2000/09/01 Optional Oil Mist Detector Groups Are Available {1336}
SPS342 Skid Mounted Pumper Cold Weather Starting
3406E Truck Engine Electrical Ground Stud
2000/08/01 Software Available For Programming Allen-Bradley Programmable Logic Controller (PLC) {1000, 7620}
G3406 Engines Stub Shaft (Rear)
Oil Mist Detectors Commissioning Procedure