3126B Engines for Caterpillar Built Machines Caterpillar


Alternator - Remove and Install

Usage:

120H 124

拆卸步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     1U-7117     扳杆     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 利用工具 (A) 释放皮带皮带张紧器上的张力。

  1. 将驱动皮带从交流发电机驱动皮带轮上拆下。



    图 1g00728265

  1. 在与交流发电机 (1) 相连的所有电气导线上做好指示标记。 将所有电气导线从交流发电机上断开。

  1. 拆下两条螺栓 (2) 。

  1. 将交流发电机 (1) 从安装支架上拆下。

安装步骤

表 2
所需工具    
工具     零件号     零件说明     数量    
A     1U-7117     扳杆     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 2g00728265

  1. 将交流发电机 (1) 定位到安装支架上。 安装 2 条螺栓 (2) 。

  1. 将驱动皮带安装到交流发电机驱动皮带轮上。

  1. 利用皮带张紧器上的工具 (A) 张紧驱动皮带。

  1. 将所有电气导线连接到交流发电机上。 利用指示标记正确连接导线。

Caterpillar Information System:

3500 Engines For Caterpillar Built Power Modules Test Tools for the Cooling System
3126B Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
3126B Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
Machine Security System Lost Key
3508, 3512, and 3516 Generator Sets Overhaul (Top End)
Machine Security System Electronic Control Module (ECM)
Machine Security System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3500 Engines For Caterpillar Built Power Modules Visual Inspection
Generator Set Control Panel for Switchgear Conversion Electrical Components And Connector Locations
3508, 3512, and 3516 Generator Sets Overhaul (Major)
Machine Security System Service Operation Using Service Tool
Machine Security System Key Information
3126B Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
3508B, 3512B, and 3516B High Displacement Generator Sets Refill Capacities
3126B Engine for Caterpillar Built Machines Fuel Transfer Pump
Machine Security System System Overview
Machine Security System Scheduled Access - "Security System Bypass Times"
Machine Security System System Disarm - Program - Security System Bypass
Machine Security System Diagnostic Code List
SR4 and SR4B Electric Power Generation Rewind Data Terminology
2000/08/01 New Gaskets, Prechamber Assembly, and Ignition Body Assembly Are Used In Prechamber Groups {1106, 1250, 7555}
3126B Engines for Caterpillar Built Machines Water Pump - Remove
3126B Engines for Caterpillar Built Machines Water Pump - Install
3126B Engines for Caterpillar Built Machines Idler Pulley - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.