Fuel Control Linkage - Check/Lubricate
Check the fuel control linkage for proper operation. If necessary, adjust the fuel control linkage . Refer to the System Operation/Testing and Adjusting, "Linkage Adjustment" for the adjustment procedures.
Show/hide table
| |
| Illustration 1 | g00723120 |
|
Typical grease fittings on the fuel control linkage | |
Some fuel control linkages require lubrication. Lubricate the grease fittings with one of the following: or grease that meets the specifications .
- Cat Multipurpose Grease
- Grease that meets the specifications of the National Lubricating Grease Institute (NLGI) for grade 2 grease
Caterpillar Information System:
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>9Y-0157</B> Generator through <B>9Y-0389</B> Generator
3126B and 3126E On-highway Engines Engine Speed/Timing Sensor - Calibrate
3406C Industrial Engine Manual Stop Procedure
Electronic Modular Control Panel II+ (EMCP II+) Display of Voltage or Current Is Zero (for MUI 3412C, 3508, 3512, 3516 and EUI and PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3406E and 3500B EUI Engines With Paralleling
HT400 Pumper Reference Material
JF Series Starting Motor Starting Motor
PM3500 Power Modules Cooling System Coolant Level - Check
Programmable Relay Control Module (PRCM) PRCM CID 0477 - FMI 03
2001/06/01 New Software Is Available For The Engines That Follow {7620}
3306C Truck Engine Connecting Rod Bearings - Inspect
3406C Industrial Engine Refill Capacities
3500 Generator Set Engines Fuel System Operation
EMCPII+ for Gas Engines GSC Operation Is Erratic
3500 Generator Set Engines Fuel Injection Control Linkage
3500 Generator Set Engines Fuel Transfer Pump
3500 Generator Set Engines Fuel Injector
3500 Generator Set Engines Fuel Injection Cycle
Programmable Relay Control Module (PRCM) PRCM CID 0477 - FMI 04
Programmable Relay Control Module (PRCM) PRCM CID 0478 - FMI 03
Programmable Relay Control Module (PRCM) PRCM CID 0478 - FMI 04
3126B and 3126E On-highway Engines Injector Solenoid Circuit - Test
Installation Of The 194-5338 Speed Sensor Gp and 194-5341 Speed Sensor Gp Service Repair Kits{1000} Installation Of The 194-5338 Speed Sensor Gp and 194-5341 Speed Sensor Gp Service Repair Kits{1000}
Programmable Relay Control Module (PRCM) PRCM CID 0479 - FMI 03