New CD-ROM Provides 3500B Mechanical Electronic Unit Injector (MEUI) Fuel System Information {1250, 1290}
- Engines: Commercial
- 3500B Series
The new CD-ROM, RENR1395, "Caterpillar 3500B MEUI Fuel System" is available through Caterpillar literature ordering channels.
Show/hide table
Illustration 1 | g00721530 |
This new CD uses animation, narration and graphics to explain basic system operation and troubleshooting. This new CD also includes information about the following subjects: fuel filtration, abrasive wear and common injector problems. An image gallery of 150 high quality JPEG images has also been included on the new CD.
The new 3500B MEUI fuel system CD-ROM is recommended for anyone that will benefit from a better understanding of this fuel system.
Caterpillar Information System:
JF Series Starting Motor No Load - Test
PM3516 Power Modules Fan Drive Bearing - Lubricate
JF Series Starting Motor Brush and Brush Holder - Check
Alternator - Delco 21SI Residual Magnetism - Restore
2000/07/01 Proper Installation of Radiator Hose {1813}
3500 Engines For Caterpillar Built Power Modules Engine Design
3500 Engines For Caterpillar Built Power Modules Engine Design
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Remains Engaged (for MUI 3412C, 3508, 3512, 3516 Engines)
3406C Industrial Engine Gauges and Indicators
G3516B Engines Gas Fuel Flow Rate (Low)
G3516B Engines Gas Fuel Differential Pressure (High)
G3516B Engines Fuel Metering Valve
Electronic Modular Control Panel II+ (EMCP II+) Display of Voltage or Current Is Zero (for MUI 3306B, 3406C Engines)
3406C Industrial Engine Refill Capacities
3306C Truck Engine Connecting Rod Bearings - Inspect
2001/06/01 New Software Is Available For The Engines That Follow {7620}
Programmable Relay Control Module (PRCM) PRCM CID 0477 - FMI 03
PM3500 Power Modules Cooling System Coolant Level - Check
JF Series Starting Motor Starting Motor
HT400 Pumper Reference Material
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3406E and 3500B EUI Engines With Paralleling
Electronic Modular Control Panel II+ (EMCP II+) Display of Voltage or Current Is Zero (for MUI 3412C, 3508, 3512, 3516 and EUI and PEEC Engines)
3406C Industrial Engine Manual Stop Procedure
3126B and 3126E On-highway Engines Engine Speed/Timing Sensor - Calibrate