G3516B Engines Caterpillar


E866 Low Gas Fuel Flow Rate

Usage:

G3516B 7EZ
Conditions Which Generate This Code:

The fuel metering valve is fully open. However, the flow rate that is computed by the valve does not match the fuel demand for a delay time of 5 seconds.

System Response:

The alarm output is activated. The code is logged.

Possible Performance Effect:

The engine performance is not immediately affected.

Troubleshooting:

Test Step 1.

Refer to Troubleshooting, "Gas Fuel Flow Rate (Low)".

Results:

  • OK - STOP

Caterpillar Information System:

Programmable Relay Control Module (PRCM) Setpoint Viewing and Programming
G3516B Engines E865 High Gas Fuel Differential Pressure
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module System Configuration Parameters
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel System - Inspect
G3516B Engines E864 Low Gas Fuel Differential Pressure
G3516B Engines E856 Cyl #16 Exhaust Port Temp Deviating Low
G3516B Engines E855 Cyl #15 Exhaust Port Temp Deviating Low
G3516B Engines E854 Cyl #14 Exhaust Port Temp Deviating Low
G3516B Engines E853 Cyl #13 Exhaust Port Temp Deviating Low
G3516B Engines E852 Cyl #12 Exhaust Port Temp Deviating Low
G3516B Engines E851 Cyl #11 Exhaust Port Temp Deviating Low
G3516B Engines E850 Cyl #10 Exhaust Port Temp Deviating Low
2000/06/01 New Hydraulic Wrenches and Pumps {0602, 0615}
3126B and 3126E On-highway Engines Intermittent Engine Shutdown
Installation Instructions for 192-1511 Air Conditioner Gp and for 192-5372 Air Conditioner Gp {7320} Installation Instructions for 192-1511 Air Conditioner Gp and for 192-5372 Air Conditioner Gp {7320}
Programmable Relay Control Module (PRCM) Service Tools
Programmable Relay Control Module (PRCM) General Information
Programmable Relay Control Module (PRCM) Fault Identification
G3516B Engines Engine Speed/Timing Sensor - Calibrate
2002/05/20 Improved Electric Fuel Shutoff Solenoid {1259}
3126B and 3126E On-highway Engines Intermittent Low Power or Power Cutout
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid - Test
G3516B Engines E867 Improper Gas Flow Control Valve Response
G3516B Engines E868 Gas Flow Control Valve Malfunction
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.