330D Excavator Forest Machine C9 Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the enclosure for the cooling system. Refer to Disassembly and Assembly, "Enclosure (Cooling System Package) - Remove".

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.

Show/hide table



Illustration 1	g01365762

1. Remove screens (1) .

Show/hide table



Illustration 2	g01365765

2. Attach Tooling (A) and a suitable lifting device to door (2). The weight of door (2) is approximately 62 kg (136 lb). Remove door (2) .

Show/hide table



Illustration 3	g01365780

3. Remove cable strap (4). Remove handle (3). Remove support assembly (5) .

Show/hide table



Illustration 4	g01365803

4. Loosen four clamps (6) .

Show/hide table



Illustration 5	g01365828

5. Remove bolts (8). Position expansion tank (7) and the bracket aside.

Show/hide table



Illustration 6	g01365838

6. Remove support assembly (9) .

Show/hide table



Illustration 7	g01365874

7. Disconnect fuel filter bases (10). Remove bolts (11) .

Show/hide table



Illustration 8	g01365883

8. Attach Tooling (B) and a suitable lifting device to aftercooler (13). The weight of aftercooler (13) is approximately 34 kg (75 lb). Remove bolts (12). Remove aftercooler (13) .