Sprocket - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7574 | Link Bracket | 1 |
- Position the machine onto suitable cribbing below the first roller. Ensure that the master pin is above the center line of the sprocket.
- Separate the track. Refer to Disassembly and Assembly, "Track - Separate".
Show/hide table
Illustration 2 g01208420 - Remove bolts (1) that hold sprocket (2) to the final drive.
Show/hide table
Illustration 3 g01208441 Note: Use several washers between Tooling (A) and sprocket (2). This will prevent damage to the sprocket.
- Attach Tooling (A) and a suitable lifting device to sprocket (2).
- Remove sprocket (2). The weight of sprocket (2) is approximately
79 kg (175 lb) .
Show/hide table
Illustration 1 | g01208414 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7574 | Link Bracket | 1 |
- Attach Tooling (A) to sprocket (2). The weight of sprocket (2) is approximately
79 kg (175 lb) . - Position sprocket (2) onto the final drive.
- Remove Tooling (A).
Show/hide table
Illustration 5 g01208420 - Install bolts (1). Tighten bolts (1) in an alternating sequence to a torque of
900 ± 100 N·m (664 ± 74 lb ft) . - Connect the Track. Refer to Disassembly and Assembly, "Track - Connect".
- Remove the suitable cribbing from the front roller.
Show/hide table
Illustration 4 | g01208441 |
Note: Use several washers between Tooling (A) and sprocket (2). This will prevent damage to the sprocket.
Caterpillar Information System:
325D Material Handler Machine Systems Swing Gear and Bearing - Install
325D Material Handler Machine Systems Swing Gear and Bearing - Remove
325D Material Handler Machine Systems Swivel - Install
325D Material Handler Machine Systems Swivel - Remove
325D Material Handler Machine Systems Stick Bearings and Seals - Install - Work Tool End
325D Material Handler Machine Systems Stick Bearings and Seals - Remove - Work Tool End
330D Excavator Machine Systems Stick Cylinder - Remove and Install
325D Material Handler Machine Systems Stick Bearings and Seals - Install - Boom End
325D Material Handler Machine Systems Stick Bearings and Seals - Remove - Boom End
321D LCR Excavator Receiver Dryer (Refrigerant) - Replace
325C MHPU Mobile Hydraulic Power Unit Engine Oil and Filter - Change
2007/09/03 New Buckets are Available for Certain Mini Hydraulic Excavators {6101, 6503}
321D LCR Excavator Engine Oil and Filter - Change
321D LCR Excavator Additional Messages
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System Automatic Lubrication Function
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Specifications - 325D and 329D Ditch Cleaner
3176C, 3406E and 3456 Industrial Engines Exhaust System Contains Oil
330D Excavator Forest Machine C9 Engine Supplement Refrigerant Condenser and Fan Motor - Remove and Install
2007/04/23 Repair Procedure for Damaged Spillguards on Wheel Loader Buckets {6101, 6102, 7000}
2007/04/16 An Improved Hose Routing Helps Prevent Damage to Hoses {5057}
330D Excavator Forest Machine C9 Engine Supplement Aftercooler - Remove
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 1558 - FMI 14
330D Excavator Forest Machine C9 Engine Supplement Aftercooler - Install
Procedure to Convert Coupler for Use On 950H and 962H Wheel Loaders{6129} Procedure to Convert Coupler for Use On 950H and 962H Wheel Loaders{6129}