Track Roller Mounting
Show/hide table
 | |
| Illustration 1 | g00704497 |
Clearance (A) between the Track Carrier Roller and the mounting bracket must be 7.0 ± 0.5 mm (.28 ± .02 inch).
(2) The filler plug for the Track Roller must be facing outward at installation.
Caterpillar Information System:
3412 Generator Set Engines Basic Engine
325, 325B and 325L Excavators Track Carrier Roller
G3516B Engines MID 036 - CID 0106 - FMI 03 Air Inlet Pressure Sensor short to +batt
G3516B Engines MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
G3408 and G3412 Engines Refill Capacities
CPT372 Truck Mounted Pumper Sensors and Electrical Components
G3516B Engines MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
2000/07/01 Improvements to Turbocharger Water Lines Groups Help Prevent Leaks {1052, 1380}
325, 325B and 325L Excavators Track Roller (Single Flange)
2000/04/01 Use the Proper Electronic Troubleshooting Guide {1000}
G3516B Engines MID 036 - CID 0041 - FMI 04 8 Volt DC Supply short to ground
G3516B Engines MID 036 - CID 0041 - FMI 03 8 Volt DC Supply short to +batt
320C Excavator Machine System Specifications Swing Cushion Valve
2000/05/01 New Crankshaft And Camshaft Speed Sensor Groups Available For 1999 And 2000 Model Year Heavy Duty On-Highway Truck Engines {1907}
G3516B Engines MID 036 - CID 0106 - FMI 08 Air Inlet Pressure Sensor noisy signal
G3408 and G3412 Engines Actuator Control Linkage - Lubricate
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head Valves
C-10 and C-12 Industrial Engines Cylinder Liner
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Analog Sensor Supply
325, 325B and 325L Excavators Front Idler
325, 325B and 325L Excavators Recoil Spring
G3516B Engines MID 036 - CID 0109 - FMI 08 Engine Coolant Outlet Pressure Sensor noisy signal
G3516B Engines MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt