Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
- Engine:
- 3114
- 3116
- 3126 and 3126B
Features/Benefits
- The143-2099 Injector Sleeve Group will help pull the sleeve with less effort.
- The chamfer rolls the top of the injector sleeve over the sleeve stud.
- This helps keep the stud from pulling out of the injector sleeve.
Show/hide table
Illustration 1 | g00698909 |
(1) Pulling Stud (2) 139-0692 Sleeve Jaw (3) Sleeve Stud |
Caterpillar Information System:
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Selection Guide for Voltage Regulator (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR3 Voltage Regulator Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR4 Voltage Regulator Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Oil Field Generator Connections (SR4)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Stator and Voltage Sensing Lead Connections (SR4B for 3500 Engines)
3054 Engine Air Inlet and Exhaust System - Inspect
2000/04/01 Correction To Parts Manual, SEBP2697-02 {1000}
2000/06/01 Improved Pacbrake Operation can be Attained by Removal of Breather Bolt or by Rerouting Solenoid Wiring on Some C-15 and C-16 Truck Engines {1129}
Uninterruptible Power Supply (UPS) 250 Installation
Uninterruptible Power Supply (UPS) 250 Dry Contact - Configure
2000/04/01 43-02 "Ignition Key Switch Fault" (71) {1553}
Electronic Modular Control Panel II (EMCP II) Component Location - For 3406E Engines
2000/04/01 Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/01 Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>111-8240</B> Generator through <B>112-1481</B> Generator
3114, 3116, and 3126 Engines Fuel System - Inspect
325D and 329D Excavators Hydraulic System Pilot Valve (Travel)
3114, 3116, and 3126 Engines Engine Speed - Check
345B Series II Excavator Machine System Specifications Track Roller (Double Flange)
3114, 3116, and 3126 Engines Finding Top Center Position for No. 1 Piston
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install - Serrated Connecting Rod
3512B Marine Auxiliary Engine Crankshaft
3512B and 3512C Engines For Caterpillar Built Machines Camshaft