Turbocharger - Remove
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 有关涡轮增压器部件的可再用性信息，请参阅再使用零件和修补操作指南, SEBF8018, "涡轮增压器"。 有关涡轮增压器部件的修补信息，请参阅再使用零件和修补操作指南, SEBF8071, "修补涡轮增压器部件的步骤"。
Show/hide table
 | |
| 图 1 | g00617515 |
Show/hide table
 | |
| 图 2 | g00617565 |
- 从涡轮增压器 (6) 上断开输油管组件 (5) 。
- 拆下螺栓 (1) ，然后从涡轮增压器 (6) 上断开回油管组件 (2) 。
- 拆下螺栓 (3) 。
- 卸下锁紧螺母 (4) 。
- 从排气歧管上卸下涡轮增压器 (6) 和密封垫。
- 从芯上拆下端部壳体。
注: 在涡轮增压器芯和壳体上做指示标记。
注: 废气旁通阀是涡轮机壳体的组成部分，在出厂时预设。 废气旁通阀不可维修。
Caterpillar Information System:
3500B Engines Auxiliary Water Pump - Install - Auxiliary Pump
3500B Engines Auxiliary Water Pump - Remove - Auxiliary Pump
3114, 3116, and 3126 Engines Lubrication System
345B Excavator Engine Air Filter Primary Element - Clean/Replace
325D and 329D Excavators Hydraulic System Stick Drift Reduction Valve
3064 and 3066 Engines for Caterpillar Built Machines Main Bearings - Inspect
G3516B Engines Engine Shutdown without a Diagnostic Code
3116 and 3126 Truck Engines Fan Drive - Assemble
3116 and 3126 Truck Engines Fan Drive - Disassemble
797 Off-Highway Truck Upper and Lower Link (Suspension) - Disassemble
3612 and 3616 Engines Fuel Setting
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Block - Inspect
3618 Engine Fuel Transfer Pump - Assemble
3618 Engine Connecting Rod
G3516B Engines Intermittent Engine Shutdown
G3516B Engines Electronic Service Tool Will Not Communicate with ECM - The Caterpillar Electronic Technician (ET) Will Not Communicate With the Electronic Control Module (ECM) and/or the Integrated Temperature Sensing Module (ITSM)
Disassembly and Assembly of the TPL61 Turbocharger{1052} Disassembly and Assembly of the TPL61 Turbocharger{1052}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0076</B> Generator through <B>5N-0090</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0431</B> Generator through <B>5N-7207</B> Generator
3114, 3116, and 3126 Engines Cooling System
3512B Petroleum Engines Engine Oil Pressure
3512B Petroleum Engine Before Starting Engine
3512B Petroleum Engine Cold Weather Starting
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR3F Voltage Regulator Connections (SR4B for 3500 Engines)