Engine Oil Pressure
The ECM automatically performs the following functions for low engine oil pressure:
- Warning
- Shutdown
The strategy is based on a map of the engine oil pressure versus the engine rpm. The default settings that are programmed at the factory are listed in Table 1.
Show/hide table
Engine Oil Pressure     | |
Parameter     | Default Settings     |
Hysteresis     | 20 kPa     |
Activation delay     | 10 seconds     |
Security level     | Required password     |
Warning setpoint     | Map     |
Warning delay     | 4 seconds     |
Shutdown setpoint     | Map     |
Shutdown delay     | 9 seconds     |
Show/hide table
Illustration 1 | g00863970 |
Map of the engine oil pressure versus the engine rpm (Y) Engine oil pressure in kPa (X) Engine rpm (1) Hysteresis (minimum and maximum oil pressure) (2) Normal engine oil pressure |
If the engine oil pressure is below the minimum pressure for four seconds, a warning will occur. To deactivate the warning, the engine oil pressure must rise above the hysteresis that is set in the map.
If the engine oil pressure is below the minimum pressure for nine seconds, a shutdown will occur.
The map cannot be reprogrammed.
Caterpillar Information System:
3114, 3116, and 3126 Engines Cooling System
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0431</B> Generator through <B>5N-7207</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0076</B> Generator through <B>5N-0090</B> Generator
Disassembly and Assembly of the TPL61 Turbocharger{1052} Disassembly and Assembly of the TPL61 Turbocharger{1052}
G3516B Engines Electronic Service Tool Will Not Communicate with ECM - The Caterpillar Electronic Technician (ET) Will Not Communicate With the Electronic Control Module (ECM) and/or the Integrated Temperature Sensing Module (ITSM)
G3516B Engines Intermittent Engine Shutdown
3618 Engine Connecting Rod
3618 Engine Fuel Transfer Pump - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines Turbocharger - Remove
3500B Engines Auxiliary Water Pump - Install - Auxiliary Pump
3500B Engines Auxiliary Water Pump - Remove - Auxiliary Pump
3114, 3116, and 3126 Engines Lubrication System
3512B Petroleum Engine Before Starting Engine
3512B Petroleum Engine Cold Weather Starting
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR3F Voltage Regulator Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Revolving Field Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Digital Voltage Regulator Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Options (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR3F Voltage Regulator Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Main Revolving Field Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options VR3 Voltage Regulator Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Digital Voltage Regulator Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Options (SR4B for 3500 Engines)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Lifting Bracket