Fan Drive - Disassemble
Disassembly Procedures
Start By:
- Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) and the fan drive pulley.
Show/hide table
Illustration 1 | g01011971 |
- Remove bolts (6) and the washers from the bearing retainer (2) .
- Remove fan drive shaft (5) from fan support (3) .
Note: Access to bolts (6) can be made by rotating the fan drive shaft.
- Remove bolts (9) and remove thrust plate (4) .
- Remove rolling bearing (8) and bearing retainer (2 ) from fan drive shaft (5). Remove O-ring seal (7) from the bearing retainer.
Caterpillar Information System:
797 Off-Highway Truck Upper and Lower Link (Suspension) - Disassemble
3612 and 3616 Engines Fuel Setting
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Block - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Connecting Rod Bearings - Inspect
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Assemble
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Disassemble
3612 and 3616 Engines Heinzmann Governor
3612 and 3616 Engines Woodward 3161 Governor
3126 Truck Engine Military Vibration Damper and Pulley - Remove and Install
2000/04/01 Improved Cat ID Display Gp {7490}
3126 Truck Engine Military Engine Control Module - Remove and Install
2000/05/01 Summary Listing of Gas Engine News Articles {1000}
3116 and 3126 Truck Engines Fan Drive - Assemble
G3516B Engines Engine Shutdown without a Diagnostic Code
3064 and 3066 Engines for Caterpillar Built Machines Main Bearings - Inspect
325D and 329D Excavators Hydraulic System Stick Drift Reduction Valve
345B Excavator Engine Air Filter Primary Element - Clean/Replace
3114, 3116, and 3126 Engines Lubrication System
3500B Engines Auxiliary Water Pump - Remove - Auxiliary Pump
3500B Engines Auxiliary Water Pump - Install - Auxiliary Pump
3114, 3116, and 3126 Engines for Caterpillar Built Machines Turbocharger - Remove
3618 Engine Fuel Transfer Pump - Assemble
3618 Engine Connecting Rod
G3516B Engines Intermittent Engine Shutdown