Engine Control Module - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Loosen screw (3) until harness assembly (1) can be disconnected. Disconnect harness assembly (1) from electronic control module (2) .
Show/hide table
 | |
| Illustration 1 | g00693487 |
- Remove bolts (4). Remove the electronic control module from the engine.
Installation Procedure
- Position electronic control module (2) on the engine and install bolts (4) .
Show/hide table
| | |
| Illustration 2 | g00693487 |
- Connect harness assembly (1) to control module (2). Install screws (4) and tighten screws to a torque of 0.9 N·m (8 lb in).
Caterpillar Information System:
2000/05/01 Summary Listing of Gas Engine News Articles {1000}
3618 Engine Fuel Transfer Pump - Install
3064 and 3066 Engines for Caterpillar Built Machines Flywheel Housing - Inspect
3618 Engine Fuel Transfer Pump - Disassemble
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Install
345B Series II Excavator Machine System Specifications Boom - 6.55 m (21.489 ft)
3034 Engine for Caterpillar Built Machines Connecting Rod Bearing Journal
3054 Engine Fuel Quality - Test
3612 and 3616 Engines Fuel Pressure Control Valve - Assemble
SR4 and SR4B Generators and Control Panels Caterpillar Monitoring System - For Generator Sets with the EMCP II, EMCP II+, and EMCP II+P Control Panels
3612 and 3616 Engines Woodward EGB29P Governor
3034 Engine for Caterpillar Built Machines Main Bearing Journal
2000/04/01 Improved Cat ID Display Gp {7490}
3126 Truck Engine Military Vibration Damper and Pulley - Remove and Install
3612 and 3616 Engines Woodward 3161 Governor
3612 and 3616 Engines Heinzmann Governor
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Disassemble
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Assemble
3064 and 3066 Engines for Caterpillar Built Machines Connecting Rod Bearings - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Block - Inspect
3612 and 3616 Engines Fuel Setting
797 Off-Highway Truck Upper and Lower Link (Suspension) - Disassemble
3116 and 3126 Truck Engines Fan Drive - Disassemble
3116 and 3126 Truck Engines Fan Drive - Assemble