Auxiliary Water Pump - Assemble
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件名称 | 数量 |
| B | 1P-0510 | 冲头套件 | 1 |
| C | 207-1601 | 橡胶润滑剂 | 1 |
| D | 7N-8268 | 安装工具 | 1 |
- 切勿润滑密封件 (10)的密封唇口。 安装环组件 (11)。 使用工具 (B)安装密封件 (10)。
Show/hide table
图 2 g01207696 - 将装有止推垫圈 (9)的轴 (7)装入水泵 (3)。 安装螺栓 (8)。
Show/hide table
图 3 g01207752 Show/hide table
图 4 g01207755 - 翻转水泵 (3)。 使用水或工具 (C)辅助组装。 使用工具 (D)并用手按压，将密封总成 (12)上的陶瓷密封圈和橡胶密封件安装到水泵 (3)中。 从密封圈上拆下弹簧。 使用工具 (D)并用手按压，将密封总成 (12)上的密封圈压到轴上，使密封面相接触。
Show/hide table
图 5 g01207678 - 安装弹簧 (6)。
Show/hide table
图 6 g01207798 Show/hide table
弹簧压缩零件如果安装不当，会伤害人体。
为避免伤害，遵照出版的装配程序，并穿上保护装备。
- 用清洁的发动机机油润滑轴 (7)。 使用工具 (B)和适当的压具将叶轮 (5)安装到轴 (7)上。 安装叶轮 (5)时，使叶轮 (5)与轴 (7)齐平。
Show/hide table
图 7 g01204935 注: 检查 O 形密封圈有无磨损或损坏。 如有必要，请更换 O 形密封圈。
- 将 O 形密封圈 (4)安装到盖 (2)上。
Show/hide table
图 8 g01204934 - 将盖 (2)安装到水泵 (3)上。 安装螺母 (1)。
Show/hide table
| |
| 图 1 | g01207698 |
结束:
- 安装辅助水泵。 请参考拆解和组装, "辅助水泵 － 安装"部分。
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Main Hydraulic Pump
320D2 Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
H140D S, H160D S and H180D S Hydraulic Hammers Hydraulic Hammer
320D RR Excavator and 320D RR Forest Machine Hydraulic System Displacement Change Valve
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Install
320D RR Excavator and 320D RR Forest Machine Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Remove
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Charging System - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Exhaust Temperature Is Too High
2006/01/02 259-6237 Tester Group (Cooling System) Is Available Through Dealer Service Tools {0646, 0708}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
H140D S, H160D S and H180D S Hydraulic Hammers Tool Bushing (Lower)
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Connect
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Electrical Connectors - Inspect
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Crankshaft Vibration Damper and Pulley - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Crankshaft Vibration Damper and Pulley - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Belt Tightener - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Belt Tightener - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Lower
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fuel Transfer Pump - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Water Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Water Pump - Install