Pilot Valve (Travel) - Install
安装步骤
注: 检查 O 形密封圈有无磨损或损坏。 必要时更换 O 形密封圈。
- 将先导阀 (18) 放置到位，然后安装螺栓 (17) 。
Show/hide table
 | |
| 图 1 | g00805746 |
注: 确保阀门端口处于正确位置。
- 将波纹管 (16) 安装到先导阀上。
Show/hide table
 | |
| 图 2 | g00805743 |
- 将行驶踏板 (13) 和 (14) 定位在先导阀上。 安装螺栓 (15) 。 拧紧螺栓 (15) 至扭矩为 33 ± 3 N·m (25 ± 3 lb ft)。
Show/hide table
 | |
| 图 3 | g00805740 |
- 在行驶踏板上安装橡胶踏板 (12) 和 (11) 。
Show/hide table
 | |
| 图 4 | g00805736 |
- 在行驶踏板周围安装橡胶地板垫 (10) 。
Show/hide table
 | |
| 图 5 | g01207620 |
- 将液压接头 (9) 和 (8) 安装到先导阀中。
Show/hide table
 | |
| 图 6 | g00805726 |
注: 液压接头 (9) 是带滤清器的液压接头。
- 连接软管组件 (3) 、 (4) 、 (5) 、 (7) 和 (6) 。 拧紧所有软管组件至扭矩为 37 ± 4 N·m (27 ± 3 lb ft)。
Show/hide table
 | |
| 图 7 | g00805699 |
- 检查液压系统油位。 请参阅操作和保养手册, "液压系统油位 – 检查"。
- 使用螺栓 (2) 安装薄板 (1) 。
Show/hide table
 | |
| 图 8 | g01207616 |
Caterpillar Information System:
320D RR Excavator and 320D RR Forest Machine Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Remove
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Charging System - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Exhaust Temperature Is Too High
2006/01/02 259-6237 Tester Group (Cooling System) Is Available Through Dealer Service Tools {0646, 0708}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Calibration
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioning System Schematic
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Radiator - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Hydraulic Oil Cooler - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Remove
320D RR Excavator and 320D RR Forest Machine Hydraulic System Displacement Change Valve
H140D S, H160D S and H180D S Hydraulic Hammers Hydraulic Hammer
320D2 Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Main Hydraulic Pump
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
H140D S, H160D S and H180D S Hydraulic Hammers Tool Bushing (Lower)
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Connect
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Electrical Connectors - Inspect
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Crankshaft Vibration Damper and Pulley - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Crankshaft Vibration Damper and Pulley - Install