Air Lines
Show/hide table
 | |
| Illustration 1 | g01200007 |
(1) Clamp bolt
- Torque ... 16 ± 4 N·m (142 ± 35 lb in)
- Lightly tap the clamp with a hammer and torque the clamp bolt again. ... 16 ± 4 N·m (142 ± 35 lb in)
(2) Inlet of the muffler
(3) Turbocharger heat shield
(4) Air cleaner group
Caterpillar Information System:
3508 EUI Engines for Caterpillar Built Machines Air Cleaner
3508 EUI Engines for Caterpillar Built Machines Muffler
PR172, PR184 and PR190 Power Rake Chain Case Lubricant - Change
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
324D Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
324D Excavator Hydraulic System Travel on Level Ground - Test
PR172, PR184 and PR190 Power Rake Bearing - Lubricate
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
325D and 329D Excavators Hydraulic System Pump Control (Negative Flow) - Adjust
PR172, PR184 and PR190 Power Rake Reference Material
PR172, PR184 and PR190 Power Rake Transport Position
M313D, M315D, M316D, M318D and M322D Wheeled Excavators and M318D MH and M322D MH Wheeled Material Handlers Hydraulic System General Testing and Adjusting Information
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
365C Excavator Machine Systems Main Hydraulic Pump - Disassemble
365C Excavator Machine Systems Main Hydraulic Pump - Assemble
325D Excavator Cab Riser (Adjustable) Linkage - Lubricate
2005/09/12 The Refueling Switch Is Improved {1295, 1408}
C7 and C9 Engines for Caterpillar Built Machines System Configuration Parameters
324D Excavator Hydraulic System Cylinder Drift - Check - Loaded Bucket
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
PR172, PR184 and PR190 Power Rake Tire Inflation - Check
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time