Cab Riser (Adjustable) Linkage - Lubricate
Show/hide table
| |
| Illustration 1 | g06137525 |
- Position the cab in the lowered position.
- Wipe all fittings before you apply lubricant.
- Apply lubricant through fittings (1) in order to lubricate the linkage.
Note: Service the cab tilt linkage once every 500 service hours.
Show/hide table
| |
| Illustration 2 | g01255504 |
(1) Location of lock pin for tilt cab
Show/hide table
| |
| Illustration 3 | g01255647 |
Note: Cab at 0° tilt
(2) Locking pin
Show/hide table
| |
| Illustration 4 | g01255673 |
(3) Top view of lock pin
Show/hide table
| |
| Illustration 5 | g01255732 |
(4) Storage support for lock pin
(5) Position of the tilt cab at 17°
Show/hide table
| |
| Illustration 6 | g01255801 |
(6) Front view of storage support for lock pin
Show/hide table
| |
| Illustration 7 | g01255919 |
(7) Starting position of the lock pin in the storage support
(8) Position of the lock pin in the storage support
Show/hide table
| |
| Illustration 8 | g01256078 |
(9) Position of lock pin in the storage support on the machine
Caterpillar Information System:
365C Excavator Machine Systems Main Hydraulic Pump - Assemble
365C Excavator Machine Systems Main Hydraulic Pump - Disassemble
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
3508 EUI Engines for Caterpillar Built Machines Air Lines
3508 EUI Engines for Caterpillar Built Machines Air Cleaner
3508 EUI Engines for Caterpillar Built Machines Muffler
PR172, PR184 and PR190 Power Rake Chain Case Lubricant - Change
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
324D Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
324D Excavator Hydraulic System Travel on Level Ground - Test
PR172, PR184 and PR190 Power Rake Bearing - Lubricate
2005/09/12 The Refueling Switch Is Improved {1295, 1408}
C7 and C9 Engines for Caterpillar Built Machines System Configuration Parameters
324D Excavator Hydraulic System Cylinder Drift - Check - Loaded Bucket
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
PR172, PR184 and PR190 Power Rake Tire Inflation - Check
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C6.6 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C6.6 Engines for Caterpillar Built Machines Electrical System
324D and 326D Excavators Operation Information
325D and 329D Excavators Operation Information