PR172, PR184 and PR190 Power Rake Caterpillar


Transport Position

Usage:

PR190 GLB


OZNÁMENÍ

Konkrétní informace o použitém nosném stroji vyhledejte v příručce pro provoz a údržbu tohoto nosného stroje.


Chcete-li pracovní nástroj přepravovat, nakloňte jej dozadu a zdvihněte ramena nakladače na nosném stroji.

Při přepravě udržujte pracovní nástroj co nejníže je to možné při zachování dostatečné světlé výšky.

Pracovní nástroj přepravujte nízkou rychlostí. Vyhýbejte se rychlým pohybům ze strany na stranu. Vyhněte se jakýmkoliv náhlým zastavením.

Při jízdě do svahu a ze svahu musí být pracovní nástroj otočen směrem nahoru do svahu.

Caterpillar Information System:

M313D, M315D, M316D, M318D and M322D Wheeled Excavators and M318D MH and M322D MH Wheeled Material Handlers Hydraulic System General Testing and Adjusting Information
Guideline for Examining Failed Parts{1000, 7000} Guideline for Examining Failed Parts{1000, 7000}
C6.6 Engines for Caterpillar Built Machines Fuel System - Inspect
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler - Inspect
C6.6 Engines for Caterpillar Built Machines Fuel System - Prime
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System Process for Setting Up the Work Tool
PR172, PR184 and PR190 Power Rake Work Tool Installation and Removal
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175} Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
324D Excavator Hydraulic System Cylinder Speed - Check
Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050} Index of Wall Charts for Drivetrain, Engine, Hydraulics, and Undercarriage{1000, 4000, 4150, 5050}
PR172, PR184 and PR190 Power Rake Lifting and Tying Down
PR172, PR184 and PR190 Power Rake Reference Material
325D and 329D Excavators Hydraulic System Pump Control (Negative Flow) - Adjust
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
PR172, PR184 and PR190 Power Rake Bearing - Lubricate
324D Excavator Hydraulic System Travel on Level Ground - Test
324D Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
PR172, PR184 and PR190 Power Rake Chain Case Lubricant - Change
3508 EUI Engines for Caterpillar Built Machines Muffler
3508 EUI Engines for Caterpillar Built Machines Air Cleaner
3508 EUI Engines for Caterpillar Built Machines Air Lines
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.