Bucket - Remove and Install
Removal Procedure
- Position bucket (3) flat on the floor with the stick in a vertical position.
Show/hide table
 | |
| Illustration 1 | g01181527 |
- Remove locking pins (1) and pin assemblies (2) .
- Use the machine hydraulics to remove the bucket linkage from bucket (3). The weight of bucket (3) is approximately 54 kg (120 lb).
Installation Procedure
Note: Clean all pin bores before installing the bucket.
- Use the machine hydraulics to position the bucket linkage onto bucket (3). The weight of bucket (3) is approximately 54 kg (120 lb).
Show/hide table
| | |
| Illustration 2 | g01181527 |
- Install pin assemblies (2) and locking pins (1) .
Caterpillar Information System:
A7B and A14B Augers Transport Position
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170} Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
320D and 323D Excavators Hydraulic System Boom Hydraulic System
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Install
325C Excavator Engine Supplement Radiator - Disassemble
325C Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove - Aftercooler
325C Excavator Engine Supplement Radiator - Assemble
325C Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Install - Aftercooler
C32 Petroleum Generator Sets Speed Sensor - Clean/Inspect
325D and 329D Excavators Hydraulic System Solenoid Valve (Fine Swing) - If Equipped
365C Excavator Engine Supplement Fan Guard - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
365C Excavator Engine Supplement Engine - Remove
365C Excavator Engine Supplement Engine - Install
385C Material Handler Hydraulic System Cylinder Drift - Check
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1590 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1590 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1590 - FMI 06
304C and 305C Mini Hydraulic Excavators Machine Systems Boom Cylinder - Remove and Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Plate Locations and Film Locations
385C Material Handler Hydraulic System Cylinder Speed - Check
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
325C Excavator Reference Material