Fan Guard - Remove and Install
拆卸步骤
开始:
- 拆下风扇总成。 请参阅拆解和组装, "风扇总成（包括风扇、风扇护罩、风扇罩和液压风扇马达）- 拆卸"。
注: 顶部风扇护罩可以在机器上拆下。 必须拆下风扇总成才能拆卸底部风扇护罩。 如果需要拆下底部风扇护罩，则保留顶部风扇护罩的固定状态，以便在风扇总成拆卸中作为支撑。
- 将风扇总成 (1) 定位到适当的垫块上，如图所示。
Show/hide table
 | |
| 图 1 | g01184176 |
- 从两侧卸下螺栓 (2) 和 (3) 。
Show/hide table
 | |
| 图 2 | g01184211 |
- 拆下螺栓 (4) 和风扇护罩 (5) 。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 3 | g01184212 |
安装步骤
- 安置风扇护罩 (5) 并安装螺栓 (4) 。 对于另一侧，重复本步骤。
Show/hide table
| | |
| 图 4 | g01184212 |
- 将螺栓 (2) 和 (3) 安装到风扇总成 (1) 的两侧上。
Show/hide table
| | |
| 图 5 | g01184211 |
Show/hide table
| | |
| 图 6 | g01184176 |
End By: 安装风扇总成。 请参阅 拆解和组装, "风扇总成（包括风扇、风扇护罩、风扇罩和液压风扇马达）- 安装"。
Caterpillar Information System:
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Disassemble
365C Excavator Engine Supplement Fan Drive - Install
365C Excavator Engine Supplement Fan Drive - Remove
365C Excavator Engine Supplement Fan - Remove and Install
385C Material Handler Hydraulic System Swing Speed and Overswing on Level Ground - Check
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Cooling System Coolant Sample - Obtain
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1525 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1525 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1525 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1523 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1523 - FMI 05
325D and 329D Excavators Hydraulic System Solenoid Valve (Fine Swing) - If Equipped
C32 Petroleum Generator Sets Speed Sensor - Clean/Inspect
325C Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Install - Aftercooler
325C Excavator Engine Supplement Radiator - Assemble
325C Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove - Aftercooler
325C Excavator Engine Supplement Radiator - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Install
320D and 323D Excavators Hydraulic System Boom Hydraulic System
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170} Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
A7B and A14B Augers Transport Position
302.5C Mini Hydraulic Excavator Machine Systems Bucket - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install