Fan Pump - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Gp     | 1     |
B     | 9S-9152     | Bearing Puller Gp     | 1     |
C     | 1P-1858     | Retaining Ring Pliers     | 1     |
D     | 1P-1861     | Retaining Ring Pliers     | 1     |
Start By:
- Remove the fan pump. Refer to Disassembly and Assembly, "Fan Pump - Remove".
- Remove bolts (1) and valve (2) .
Show/hide table
Illustration 1 | g01179113 |
- Remove O-ring seals (3), nut (5), and coil (4) .
Show/hide table
Illustration 2 | g01179112 |
- Remove cartridge assembly (14), adapter (13), backup ring (12), spool (11), spring (10), and retainers (9) .
Show/hide table
Illustration 3 | g01179111 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove valve (6), O-ring seal (8), and backup ring (7) .
- Remove valve (19), spring (18), spring (17), retainer (16), and spool (15) .
- Remove bolts (20) and head assembly (21) .
Show/hide table
Illustration 4 | g01179098 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove O-ring seals (22), port plate (23), and bearing cup (24) .
Show/hide table
Illustration 5 | g01179099 |
- Remove O-ring seal (25), spring (26), and piston (27) .
Show/hide table
Illustration 6 | g01179100 |
- Remove piston (28) and bearing cone (29) .
Show/hide table
Illustration 7 | g01179101 |
- Remove shim (30) and rotating assembly (31) .
Show/hide table
Illustration 8 | g01179102 |
- Remove pistons (32) and retaining plate (33) .
Show/hide table
Illustration 9 | g01179103 |
- Remove bearing (34) .
Show/hide table
Illustration 10 | g01179104 |
- Use Tooling (A), Tooling (C), and a suitable press in order to remove retaining ring (36) from barrel (35) .
Show/hide table
Illustration 11 | g01179105 |
Show/hide table
Illustration 12 | g01179106 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove spring (39), washer (38), and pins (37) .
- Remove swashplate (40) .
Show/hide table
Illustration 13 | g01179107 |
- Remove bearings (41) and shaft (42) .
Show/hide table
Illustration 14 | g01179109 |
- Use Tooling (B) and a suitable press in order to remove bearing cone (43) from shaft (42) .
Show/hide table
Illustration 15 | g01179110 |
- Use Tooling (D) in order to remove retaining ring (44) .
Show/hide table
Illustration 16 | g01179314 |
- Remove lip seal (45) .
- Remove bearing cup (46) .
Caterpillar Information System:
2005/08/01 New Seals for the Swivel Are Now Available {5060}
365C Material Handler Hydraulic System Hydraulic System Pressure - Release
365C Material Handler Alternate Exit
2005/07/04 A New High Temperature Gasket is Now Used {1057}
302.5C Mini Hydraulic Excavator Machine Systems Heater Core - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0262 - FMI 06
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install
325C LCR Excavator Machine Systems Hydraulic Tank and Filter - Install
325C LCR Excavator Machine Systems Hydraulic Tank and Filter - Assemble
325C LCR Excavator Machine Systems Hydraulic Tank and Filter - Disassemble
325C LCR Excavator Machine Systems Hydraulic Tank and Filter - Remove
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Fan Pump - Assemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Remove
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Pilot Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Install
980G, 988G and 988H Block Handling Work Tools Storage
980G, 988G and 988H Block Handling Work Tools Reference Material
980G, 988G and 988H Block Handling Work Tools Daily Inspection
C7.1 (Mech) Industrial Engine Glow Plugs
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
320D Excavator Belt - Inspect/Adjust/Replace
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System General Information
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Remove and Install