301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Caterpillar


Final Drive and Travel Motor - Install

Usage:

301.6C JBB

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     1    


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1g01179158

  1. Attach Tooling (A) and a suitable lifting device to the final drive and travel motor (4). The weight of the final drive and travel motor (4) is approximately 27 kg (60 lb). Position the final drive and travel motor (4) and install bolts (3) .



    Illustration 2g01179139

  1. Connect hose assemblies (2) .



    Illustration 3g01179123

  1. Install cover (1) .

  1. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".

End By: Install the track. Refer to Disassembly and Assembly, "Track - Remove and Install".

Caterpillar Information System:

301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Pilot Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Fan Pump - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Fan Pump - Disassemble
2005/08/01 New Seals for the Swivel Are Now Available {5060}
365C Material Handler Hydraulic System Hydraulic System Pressure - Release
365C Material Handler Alternate Exit
2005/07/04 A New High Temperature Gasket is Now Used {1057}
302.5C Mini Hydraulic Excavator Machine Systems Heater Core - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0262 - FMI 06
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Install
325C LCR Excavator Machine Systems Hydraulic Tank and Filter - Install
980G, 988G and 988H Block Handling Work Tools Storage
980G, 988G and 988H Block Handling Work Tools Reference Material
980G, 988G and 988H Block Handling Work Tools Daily Inspection
C7.1 (Mech) Industrial Engine Glow Plugs
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
320D Excavator Belt - Inspect/Adjust/Replace
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System General Information
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Boom Hydraulic System
Vane Type Hydraulic Pumps {5055} Vane Type Hydraulic Pumps {5055}
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Main Hydraulic Pump
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Pump Control (Main Hydraulic)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.