Final Drive and Travel Motor - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-1857 | Retaining Ring Pliers | 1 |
| C | 1P-1855 | Retaining Ring Pliers | 1 |
| D | 1P-1859 | Retaining Ring Pliers | 1 |
| E | 1P-1863 | Retaining Ring Pliers | 1 |
- Install lip seal (40) .
Show/hide table
 | |
| Illustration 1 | g01176410 |
- Raise the temperature of bearing (39). Install bearing (39) from shaft (38) .
Show/hide table
 | |
| Illustration 2 | g01176409 |
- Install shaft (38) and bearing (39) .
Show/hide table
 | |
| Illustration 3 | g01176408 |
- Install bearing (37) .
Show/hide table
 | |
| Illustration 4 | g01176407 |
- Install Duo-cone Seal (35) and seal (36) .
Show/hide table
 | |
| Illustration 5 | g01176405 |
Show/hide table
 | |
| Illustration 6 | g01176406 |
- Install housing (34) .
Show/hide table
 | |
| Illustration 7 | g01176612 |
- Use Tooling (E) in order to install retaining ring (33) .
Show/hide table
 | |
| Illustration 8 | g01176403 |
- Install gears (32) .
Show/hide table
 | |
| Illustration 9 | g01176613 |
- Use Tooling (D) in order to install retaining rings (31) .
Show/hide table
 | |
| Illustration 10 | g01176401 |
- Use Tooling (D) in order to install retaining ring (30) .
Show/hide table
 | |
| Illustration 11 | g01176400 |
- Install sun gear (29) .
- Use Tooling (C) in order to install retaining ring (25) .
Show/hide table
 | |
| Illustration 12 | g01176399 |
- Install washers (28), gears (27), and washers (26) .
- Install carrier (23) and sun gear (24) .
Show/hide table
 | |
| Illustration 13 | g01176398 |
- Install cover (22) and retaining ring (21) .
Show/hide table
 | |
| Illustration 14 | g01176397 |
- Install balls (19), the springs, and pistons (20) .
Show/hide table
 | |
| Illustration 15 | g01176396 |
Show/hide table
 |
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
 |
- Install O-ring seal (17) and swashplate (18) .
Show/hide table
 | |
| Illustration 16 | g01176395 |
- Install washers (15) and spring (16) .
Show/hide table
 | |
| Illustration 17 | g01176392 |
- Use a suitable press and Tooling (A) in order to install retaining ring (14) .
Show/hide table
 | |
| Illustration 18 | g01176391 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install pins (13) .
Show/hide table
 | |
| Illustration 19 | g01176394 |
- Install bearing (12), pistons (10), and retaining plate (11) .
Show/hide table
 | |
| Illustration 20 | g01176393 |
- Install barrel assembly (9) .
Show/hide table
 | |
| Illustration 21 | g01176390 |
- Install port plate (8) .
Show/hide table
 | |
| Illustration 22 | g01176389 |
- Install bearing (7) .
Show/hide table
 | |
| Illustration 23 | g01176388 |
- Install head assembly (6) and bolts (5) .
Show/hide table
 | |
| Illustration 24 | g01176387 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install spool (2) .
Show/hide table
 | |
| Illustration 25 | g01176386 |
- Install spring (4) and washer (3) .
- Install the O-ring seal and plug (1) .
Show/hide table
 | |
| Illustration 26 | g01176385 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Repeat Steps 27 through Steps 28 for the opposite side.
End By: Install the track motor. Refer to Disassembly and Assembly, "Final Drive and Travel Motor - Install".
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Selector Valve (Alternate Pattern Control) - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Condenser - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Seat - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Remove
302.5C Mini Hydraulic Excavator Engine Supplement Fuel Transfer Pump - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unitwith UHD Attachment Demolition Boom Removal
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Front Idler - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Sprocket - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Hydraulic Track Adjusters - Remove and Install
322C Excavator Maintenance Interval Schedule
345C Excavators Circuit Breakers - Reset
330C Excavator with 325C Variable Undercarriage Adjustable Gage Undercarriage Frame - Lubricate
C9 Generator Set Sensors and Electrical Components
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit Specifications
2005/06/13 The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
2005/06/13 An Improved Butt Weld Reduces Internal Stress on the Boom {6501}