Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
Removal Procedure
Start By:
- Remove the track. Refer to Disassembly and Assembly, "Track - Remove and Install".
- Attach a suitable lifting device to the front idler and track adjuster (1). The weight of front idler and track adjuster (1) is approximately 25 kg (55 lb).
Show/hide table
 | |
| Illustration 1 | g01176381 |
- Remove the front idler and track adjuster (1) .
Installation Procedure
- Attach a suitable lifting device to the front idler and track adjuster (1). The weight of front idler and track adjuster (1) is approximately 25 kg (55 lb).
Show/hide table
| | |
| Illustration 2 | g01176381 |
- Install the front idler and track adjuster (1) .
End By: Install the track. Refer to Disassembly and Assembly, "Track - Remove and Install".
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Selector Valve (Alternate Pattern Control) - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Condenser - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Seat - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Remove
302.5C Mini Hydraulic Excavator Engine Supplement Fuel Transfer Pump - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unitwith UHD Attachment Demolition Boom Removal
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Track - Remove and Install
325C LCR Excavator Machine Systems Stick - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Assemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Front Idler - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Sprocket - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Hydraulic Track Adjusters - Remove and Install
322C Excavator Maintenance Interval Schedule
345C Excavators Circuit Breakers - Reset
330C Excavator with 325C Variable Undercarriage Adjustable Gage Undercarriage Frame - Lubricate
C9 Generator Set Sensors and Electrical Components
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit Specifications
2005/06/13 The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}