CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
Kondisi-kondisi yang mendorong penciptaan kode ini:
Tegangan sinyal dari sensor tekanan intake manifold (boost) berada di bawah normal.
Tanggapan:
ECM akan mencatat kode diagnostik. ECM akan memberi tanda pada tekanan intake manifold (boost) sebagai data yang tidak valid dan nilai default digunakan.
Kemungkinan Akibat Perlaksanaan:
- Daya engine mungkin rendah.
Pemecahan Masalah:
Langkah Pengujian" status="1 1.
Hasil:
- OK - BERHENTI
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
330C Excavator Hydraulic System Specifications
330C Excavator Hydraulic System Gear Pump (Fan Motor) - Test
330C Excavator Hydraulic System Gear Pump (Pilot) - Test
330C Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 1603 FMI 12 Machine Control Module malfunction
330C Excavator Hydraulic System Pump Control (Negative Flow) - Test
330C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
330C Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 0269 FMI 03 Sensor Supply too high
C11 and C15 Engines for Caterpillar Built Machines CID 0269 FMI 04 Sensor Supply too low
330C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
C27 and C32 Generator Set Engines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 1603 FMI 09 Machine Control Module not communicating on link
C7 and C9 Engines for Caterpillar Built Machines E198 Low Fuel Pressure
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0172 FMI 04 Intake Manifold Air Temp short to ground
2007/04/16 New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN) {1000}
330C With Drilling Front Machine System Specifications Fuel Tank
C7 and C9 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Event Codes
305.5 Mini Hydraulic Excavator Plate Locations and Film Locations
330C Excavator UHD Supplement Specifications - Long Reach Configuration with a Retrofit Boom (One Position)
305.5 Mini Hydraulic Excavator Operator Controls