3176C and 3196 Industrial Engines Caterpillar


Rocker Shaft - Disassemble

Usage:

3196 1DW

Disassembly Procedure

Start By:

  1. Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


Note: Place an identification mark on each of the components of the rocker shaft for installation purposes.



Illustration 1g00665676

  1. Remove rocker shaft (5) from stand (4). Valve rocker arms (1) and (3) with unit injector rocker arm (2) can be removed from stand (4).

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.