Turbocharger Speed Sensor
Show/hide table
| |
| Illustration 1 | g00657944 |
(1) Turbocharger speed sensor
Use the following procedure in order to install theTurbocharger speed sensor.
- While the engine is stopped, Install the sensor until the sensor makes contact with the bolt on the shaft assembly.
- Unscrew the sensor for 3/4 ± 1/16 turns.
- Install the locknut and tighten the locknut to
18 ± 3 N·m (13 ± 2 lb ft) .
(2) The clearance between the sensor and the bolt should be the following value. ...
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines Excessive Black Smoke
3500 Industrial and Generator Set Engines Overhaul (Top End)
3176C and 3196 Engines for Caterpillar Built Machines Excessive White Smoke
3114, 3116 and 3126 MUI Engine Governors Governor (Types I, II, IV, and V) - Check
3608 Engine Engine Speed Sensor
2000/01/24 Remanufactured 3412 Crankshafts {1202}
3500 and 3500B Engines Fuel System Secondary Filter - Replace
1999/12/01 Marine Electronic Display Installation Guide {7490}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Noise Coming from Cylinder
G3304 and G3306 Engines Cooling System
3500 Industrial and Generator Set Engines Engine Oil and Filter - Change
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Stalls at Low RPM
3054B Industrial Engine Fuel System
2000/02/01 New Electronic Control Module (ECM) Provides Improved Reliability {1901}
G3304 and G3306 Engines Electrical System
1999/12/01 A New Connector Retainer Assembly Is Available For The Electronic Ignition System (EIS) {1561}
1999/12/01 Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
3114, 3116 and 3126 MUI Engine Governors Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3608 Engine Exhaust Manifold
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft - Remove
2000/03/01 New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability {1100}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft - Install
SR500 Generators Burn Prevention
SR500 Generators Fire Prevention and Explosion Prevention