Boom Cylinder
Show/hide table
Illustration 1 | g00879052 |
(1) Torque for 12 bolts ... 267 ± 40 N·m (195 ± 30 lb ft)
(2) Torque for one locknut ... 4810 ± 240 N·m (3540 ± 175 lb ft)
(3) Torque for setscrew ... 57 ± 10 N·m (42 ± 7 lb ft)
Note: Make two indentations in the setscrew with a punch after the setscrew is torqued.
(4) Bore of head ... 85 mm (3.3 inch)
(5) Rod assembly
- Outside diameter ... 85 mm (3.3 inch)
- Minimum thickness of plating ... 0.03 mm (0.001 inch)
(6) Bore of cylinder ... 120 mm (4.7 inch)
(7) The slit of the ring must turn in the direction of the piston.
(8) Lubricate the inside diameter and the outside diameter with clean grease.
(9) 180-7756 Sleeve Bearing
- Outside diameter ... 95.102 ± 0.011 mm (3.7442 ± 0.0004 inch)
- Inside diameter ... 80.250 ± 0.020 mm (3.1594 ± 0.0008 inch)
- Installation depth of the bearing ... 10 mm (0.4 inch)
- Inside diameter ... 80.250 ± 0.020 mm (3.1594 ± 0.0008 inch)
(10) 198-5509 Sleeve Bearing
- Outside diameter ... 106.115 ± 0.011 mm (4.1777 ± 0.0004 inch)
- Inside diameter ... 90.27 ± 0.02 mm (3.554 ± 0.001 inch)
- Installation depth of the bearing ... 10 mm (0.4 inch)
- Inside diameter ... 90.27 ± 0.02 mm (3.554 ± 0.001 inch)
(11) Torque for one fitting ... 9 ± 5 N·m (80 ± 45 lb in)
Caterpillar Information System:
325D and 329D Excavators and 325D Material Handler Machine System Specifications Shuttle Valve (Pilot Lines)
2002/05/13 New Specification for Reusability of the Intake Valves and Exhaust Valves {1105}
3056E Industrial Engine Cylinder Block
318C and 319C Excavators Machine System Specifications Boom Cylinder
303 CR Mini Hydraulic Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
318C and 319C Excavators Hydraulic System Relief Valve (Crossover) - Test and Adjust
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
318C and 319C Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
307C Excavator Machine Systems Heating and Air Conditioning Unit - Install
325C Excavator Machine System Specifications Bucket Cylinder
325C Excavator Engine Oil and Filter - Change
307C Excavator Machine Systems Swing Drive - Install
AD55 Underground Articulated Truck Braking System Temperature Sensor (Brake Oil)
318C and 319C Excavators Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
318C Excavator Fuses - Replace
307C Excavator Machine Systems Seat - Remove and Install
2002/09/09 Relocation of the Seal in the Fan Drive Improves Reliability {1356, 1359}
325C Excavator Machine System Specifications Swing Gear and Bearing
303 CR Mini Hydraulic Excavator Boom/Stick/Bucket Combinations
303 CR Mini Hydraulic Excavator Monitoring System
307C Excavator Machine Systems Seat Suspension - Remove and Install
303 CR Mini Hydraulic Excavator Gauges
305 CR Mini Hydraulic Excavator Work Tool Control Pedal
325C Excavator Engine Crankcase Breather - Clean