Engine Performance - Test - Engine Speed
Show/hide table
| 所需工具 | ||
|---|---|---|
| 零件号 | 说明 | 数量 |
| 9U-7400 | 多用转速表工具组件 | 1 |
- 将机器停放在水平地面上。
- 关闭发动机。
- 将 9U-7400 多用转速表工具 组件安装在发动机上。
- 起动发动机。
- 将液压油温度提高至 55°± 5°C (131°± 9°F)。
- 读取多用转速表上的发送机转速显示 (rpm)。 有关所需发动机操作的发动机转速，请参阅表2 。
Show/hide table
| 项目 | 技术规格 | ||
|---|---|---|---|
| 新装 | 翻修 | ||
| 空载高怠速 (1) | 1880 ± 50 rpm (2) | ||
| 1980 ± 50 rpm (3) | |||
| 空载低怠速 | 800 ± 50 rpm | ||
| 有负载最大转速 (4) | 1720 rpm (5) | 1670 rpm (5) | |
| 空载转速 (6) | 1300 ± 50 rpm | ||
Show/hide table
| ( 1 ) | AEC 开关处于 OFF（断开） 位置 |
| ( 2 ) | 发动机转速刻度盘置于位置 "10" 后三秒 |
| ( 3 ) | 发动机转速刻度盘置于位置 "10" 后三秒内的发动机转速 |
| ( 4 ) | 两台泵的压力均已释放（失速情况）。 |
| ( 5 ) | 最低转速 |
| ( 6 ) | AEC 开关处于 ON（断开） 位置 |
注: 新机技术规格是新机器可预期的性能。 翻修技术规格是翻修系统部件后可预期的性能。 超出维修极限的性能表明了这些问题：不正确的保养或调整, 部件磨损 和 故障。
Caterpillar Information System:
330C Forest Machine Machine System Specifications Fuel Tank
330C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Control Valve
330C Excavator Hydraulic System Operational Checks
330C Forest Machine Hydraulic System Main Hydraulic Pump Air - Purge
5230B Excavator Machine Electronic Control System Solenoid Valves
330C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
385B Excavator Machine System Specifications Pump Lines (Main)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Track Roller Mounting
303 CR Mini Hydraulic Excavator Window Wiper and Washer Control - If Equipped
2001/11/26 Correction to Systems Operation, Testing and Adjusting , " Pump Control (Negative Flow) - Test" {5070}
330C Excavator Machine System Specifications Recoil Spring
M318C Excavator Hydraulic System Pressure Switch (Overload Warning) - Test and Adjust
330C Excavator Hydraulic System Travel on Level Ground - Test
330C Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
330C Excavator Hydraulic System Swing Speed and Overswing on Level Ground - Check
330C Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
330C Excavator Hydraulic System Cylinder Drift - Check - Loaded Bucket
385B Excavator Machine System Specifications Front Lines
330C Excavator Hydraulic System Cylinder Speed - Check
330C Excavator Tool Control System System 14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
330C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
330C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
303 CR Mini Hydraulic Excavator Alternate Exit
330C Excavator Hydraulic System Relief Valve (Main) - Test and Adjust