Cooling System Pressure Cap - Clean/Replace
Show/hide table
 |
有压力的系统: 热的冷却液能造成严重的烫伤。 为了打开盖子，要停机，等候散热器冷下来。 然后慢慢松开盖子，释放压力。 |
Show/hide table
 | |
| 图 1 | g00824105 |
冷却系统压力盖位于发动机罩的下面。
- 缓慢地释放冷却系统压力盖，以释放压力。
- 检查冷却系统压力盖和冷却系统压力盖的密封有无碎屑、杂质或损坏。
- 用干净的布清洁冷却系统压力盖。 如有必要，更换冷却系统压力盖。
- 安装冷却系统压力盖。
Caterpillar Information System:
G3500B Engines Compression
322C Excavator Machine System Specifications Fuel Tank
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Boom Cylinder - Remove and Install
5130B Excavator Bearing (Swing Drive) - Lubricate
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader Diagnostic Codes
3456 Engine for Caterpillar Built Machines CAT Data Link Circuit - Test
312C Excavator Machine Systems Swing Drive - Disassemble - Older Style
3456 Engine for Caterpillar Built Machines Diagnostic Codes
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Operation
305 CR Mini Hydraulic Excavator Work Tool Control - If Equipped
SR17, SR18, SR21, SR318 and SR321 Snowblowers Work Tool Installation
H115/H115S, H120/H120CS, H130/H130S, H140/H140S, H160/H160S, H180/H180S, and H195 Hydraulic Hammers Mounting Bracket Bolts - Tighten
SR17, SR18, SR21, SR318 and SR321 Snowblowers Operation
325C Excavator Machine System Specifications Upper Frame
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Reference Material
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Transport Position
SR17, SR18, SR21, SR318 and SR321 Snowblowers Chain - Lubricate
SR17, SR18, SR21, SR318 and SR321 Snowblowers Discharge Chute Chain - Adjust/Replace
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Lifting and Tying Down
SR17, SR18, SR21, SR318 and SR321 Snowblowers Cutting Edge - Replace
320C U Excavator Lifting Capacities
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)
325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2600 mm (102 inch)