Mounting Bracket Bolts - Tighten
Check the bolts for the mounting bracket. If necessary, tighten the bolts for the mounting bracket. Refer to the following table for the proper torque value.
Show/hide table
 | |
| Illustration 1 | g00603886 |
Show/hide table
| Sales Model | Bolt (1) | Bolt Torque |
| 115, H115s, 120, H120s, H120Cs, 130, H130s, 140, H140s | 7X-2454 or 7X-2489 | 900 ± 100 N·m (664 ± 74 lb ft) |
| 160, H160s, 180, H180s | 7Y-5265 | 3100 ± 350 N·m (2286 ± 258 lb ft) |
Caterpillar Information System:
325C Excavator Machine System Specifications Travel Motor Lines
325C Excavator Machine System Specifications Travel Motor Lines
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Specifications
2001/10/08 Instructions for Changing the Hour Meter of Caterpillar Monitoring System Using Caterpillar Electronic Technician (ET) {7490}
3456 Engine for Caterpillar Built Machines E100 Low Engine Oil Pressure Warning
SR17, SR18, SR21, SR318 and SR321 Snowblowers Bearings - Lubricate
H45/H45S, H50/H50S, 63/H63/H63S, 70/70S/H70/H70S, H90C/H90CS and 100/H100/H100S Hydraulic Hammers Mounting Bracket Bolts - Tighten
C-9 Engines for Caterpillar Built Machines Electric Starting Motor
3456 Engine for Caterpillar Built Machines Throttle Switch Circuit - Test
2001/10/29 New Swivel Rod Has a Larger Diameter at the Threaded End for Increased Durability {5060}
322C Excavator Hydraulic System Gear Pump (Fan Motor)
312C Excavator Machine Systems Swing Motor - Install
SR17, SR18, SR21, SR318 and SR321 Snowblowers Work Tool Installation
305 CR Mini Hydraulic Excavator Work Tool Control - If Equipped
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Operation
3456 Engine for Caterpillar Built Machines Diagnostic Codes
312C Excavator Machine Systems Swing Drive - Disassemble - Older Style
3456 Engine for Caterpillar Built Machines CAT Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader Diagnostic Codes
5130B Excavator Bearing (Swing Drive) - Lubricate
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Boom Cylinder - Remove and Install
322C Excavator Machine System Specifications Fuel Tank
G3500B Engines Compression
305 CR Mini Hydraulic Excavator Cooling System Pressure Cap - Clean/Replace