Travel Motor Lines
Show/hide table
Illustration 1 | g00828634 |
(1) Torque for four hose assemblies ... 190 ± 20 N·m (140 ± 15 lb ft)
(2) Apply 8C-8422 Sealant between the mating surfaces of the swivel assembly and the cover of the frame assembly under carriage.
(3) Torque for one hose assembly ... 80 ± 7 N·m (60 ± 5 lb ft)
(4) Torque for two elbow assemblies ... 37 ± 4 N·m (27 ± 3 lb ft)
(5) Torque for one tee assembly ... 40 ± 5 N·m (30 ± 4 lb ft)
(6) Torque for two connector assemblies ... 76 ± 4 N·m (55 ± 3 lb ft)
(7) Torque for two hose assemblies ... 37 ± 4 N·m (27 ± 3 lb ft)
Caterpillar Information System:
325C Excavator Machine System Specifications Travel Motor Lines
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Specifications
2001/10/08 Instructions for Changing the Hour Meter of Caterpillar Monitoring System Using Caterpillar Electronic Technician (ET) {7490}
3456 Engine for Caterpillar Built Machines E100 Low Engine Oil Pressure Warning
SR17, SR18, SR21, SR318 and SR321 Snowblowers Bearings - Lubricate
H45/H45S, H50/H50S, 63/H63/H63S, 70/70S/H70/H70S, H90C/H90CS and 100/H100/H100S Hydraulic Hammers Mounting Bracket Bolts - Tighten
C-9 Engines for Caterpillar Built Machines Electric Starting Motor
3456 Engine for Caterpillar Built Machines Throttle Switch Circuit - Test
2001/10/29 New Swivel Rod Has a Larger Diameter at the Threaded End for Increased Durability {5060}
322C Excavator Hydraulic System Gear Pump (Fan Motor)
312C Excavator Machine Systems Swing Motor - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Auxiliary)
H115/H115S, H120/H120CS, H130/H130S, H140/H140S, H160/H160S, H180/H180S, and H195 Hydraulic Hammers Mounting Bracket Bolts - Tighten
SR17, SR18, SR21, SR318 and SR321 Snowblowers Work Tool Installation
305 CR Mini Hydraulic Excavator Work Tool Control - If Equipped
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Operation
3456 Engine for Caterpillar Built Machines Diagnostic Codes
312C Excavator Machine Systems Swing Drive - Disassemble - Older Style
3456 Engine for Caterpillar Built Machines CAT Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader Diagnostic Codes
5130B Excavator Bearing (Swing Drive) - Lubricate
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Boom Cylinder - Remove and Install
322C Excavator Machine System Specifications Fuel Tank
G3500B Engines Compression