320C U Excavator Caterpillar

Lifting Capacities

Usage:

320C ALX

One-Piece Boom

Show/hide table




Illustration 1	g00586902
(H) Height (F) Lifting capacity over the front or rear of the machine (S) Lifting Capacity over the side of the machine (R) Reach

Show/hide table

Table 1
320C LU Excavator with a 5.7 m (18 ft 7 inch) reach boom, a 2.5 m (8 ft 2 inch) stick, a 1.0 m³ (1.3 yd³) bucket, 800 mm (2 ft 7 inch) track shoes and a 6514 kg (14362 lb) counterweight ⁽¹⁾ All capacities are in metric tons.
		(R)
		3.0 m		4.5 m		6.0 m		7.5 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	7.5 m									2.45 ⁽²⁾		7.24
	6.0 m					4.35 ⁽²⁾				2.3 ⁽²⁾		8.34
	4.5 m					4.9 ⁽²⁾	4.85 ⁽²⁾	4.45 ⁽²⁾	3.25	2.3 ⁽²⁾		8.97
	3.0 m			7.5 ⁽²⁾	7.3	5.65 ⁽²⁾	4.6	4.8 ⁽²⁾	3.15	2.35 ⁽²⁾		9.25
	1.5 m			9.0 ⁽²⁾	6.75	6.45 ⁽²⁾	4.35	5.2 ⁽²⁾	3.05	2.55 ⁽²⁾	2.1	9.22
	0.0 m			9.75 ⁽²⁾	6.45	7.0 ⁽²⁾	4.2	5.1	2.95	2.85 ⁽²⁾	2.2	8.89
	-1.5 m	9.15 ⁽²⁾		9.75 ⁽²⁾	6.4	7.05 ⁽²⁾	4.1	5.05	2.9	3.4 ⁽²⁾	2.55	8.21
	-3.0 m	12.7 ⁽²⁾		8.95 ⁽²⁾	6.45	6.5 ⁽²⁾	4.15			4.35 ⁽²⁾	3.3	7.07
	-4.5 m	9.8 ⁽²⁾		6.9 ⁽²⁾	6.7					5.4 ⁽²⁾	5.25	5.32

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The loads do not exceed 87 percent of hydraulic lifting capacity or 75 percent of tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 2
320C LU Excavator with a 5.7 m (18 ft 7 inch) reach boom, a 2.9 m (9 ft 6 inch) stick, a 1.0 m³ (1.3 yd³) bucket, 800 mm (2 ft 7 inch) track shoes and a 6514 kg (14362 lb) counterweight ⁽¹⁾ All capacities are in metric tons.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	7.5 m											1.8 ⁽²⁾		7.76
	6.0 m									3.3 ⁽²⁾		1.7 ⁽²⁾		8.77
	4.5 m							4.55 ⁽²⁾		4.2 ⁽²⁾	3.25	1.7 ⁽²⁾		9.37
	3.0 m			11.25 ⁽²⁾		6.95 ⁽²⁾		5.35 ⁽²⁾	4.65	4.55 ⁽²⁾	3.15	1.75 ⁽²⁾		9.64
	1.5 m					8.6 ⁽²⁾	6.85	6.2 ⁽²⁾	4.4	5.0 ⁽²⁾	3.05	1.9 ⁽²⁾		9.61
	0.0 m			5.2 ⁽²⁾		9.6 ⁽²⁾	6.5	6.85 ⁽²⁾	4.2	5.1	2.95	2.15 ⁽²⁾	2.05	9.3
	-1.5 m	5.2 ⁽²⁾		8.8 ⁽²⁾		9.8 ⁽²⁾	6.4	7.05 ⁽²⁾	4.1	5.05	2.9	2.55 ⁽²⁾	2.3	8.66
	-3.0 m	9.15 ⁽²⁾		13.55 ⁽²⁾	12.8	9.25 ⁽²⁾	6.4	6.75 ⁽²⁾	4.1			3.3 ⁽²⁾	2.9	7.6
	-4.5 m			11.0 ⁽²⁾		7.7 ⁽²⁾	6.6					3.9 ⁽²⁾		5.97

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The loads do not exceed 87 percent of hydraulic lifting capacity or 75 percent of tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 3
320C LU Excavator with a 5.7 m (18 ft 7 inch) reach boom, a 3.9 m (12 ft 8 inch) stick, a 1.0 m³ (1.3 yd³) bucket, 800 mm (2 ft 7 inch) track shoes and a 6514 kg (14362 lb) counterweight ⁽¹⁾ All capacities are in metric tons.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		9.0 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	7.5 m									2.55 ⁽²⁾				1.4 ⁽²⁾		8.83
	6.0 m									3.1 ⁽²⁾				1.3 ⁽²⁾		9.71
	4.5 m									3.45 ⁽²⁾	3.3	2.4 ⁽²⁾	2.25	1.3 ⁽²⁾		10.24
	3.0 m							4.45 ⁽²⁾	4.45	3.9 ⁽²⁾	3.15	3.1 ⁽²⁾	2.2	1.35 ⁽²⁾		10.48
	1.5 m			9.2 ⁽²⁾		7.4 ⁽²⁾	7.0	5.45 ⁽²⁾	4.4	4.45 ⁽²⁾	3.0	3.7 ⁽²⁾	2.1	1.5 ⁽²⁾		10.46
	0.0 m			6.5 ⁽²⁾		8.8 ⁽²⁾	6.5	6.25 ⁽²⁾	4.15	4.9 ⁽²⁾	2.85	3.7	2.05	1.65 ⁽²⁾	1.6	10.18
	-1.5 m	4.4 ⁽²⁾		8.2 ⁽²⁾		9.5 ⁽²⁾	6.2	6.75 ⁽²⁾	3.95	4.9	2.75			2.0 ⁽²⁾	1.8	9.61
	-3.0 m	7.2 ⁽²⁾		11.45 ⁽²⁾		9.45 ⁽²⁾	6.15	6.8 ⁽²⁾	3.9	4.9	2.75			2.55 ⁽²⁾	2.15	8.69
	-4.5 m	10.7 ⁽²⁾		12.8 ⁽²⁾	12.55	8.6 ⁽²⁾	6.25	6.15 ⁽²⁾	3.95					3.65 ⁽²⁾	3.0	7.27
	-6.0			9.4 ⁽²⁾		6.35 ⁽²⁾								4.8 ⁽²⁾		5.37

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The loads do not exceed 87 percent of hydraulic lifting capacity or 75 percent of tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Caterpillar Information System:

SR17, SR18, SR21, SR318 and SR321 Snowblowers Cutting Edge - Replace

CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Lifting and Tying Down

SR17, SR18, SR21, SR318 and SR321 Snowblowers Discharge Chute Chain - Adjust/Replace

SR17, SR18, SR21, SR318 and SR321 Snowblowers Chain - Lubricate

CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Transport Position

CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Reference Material

325C Excavator Machine System Specifications Upper Frame

SR17, SR18, SR21, SR318 and SR321 Snowblowers Operation

305 CR Mini Hydraulic Excavator Cooling System Pressure Cap - Clean/Replace

G3500B Engines Compression

322C Excavator Machine System Specifications Fuel Tank

BH27, BH30 and BH30 W Skid Steer Loader Backhoes Boom Cylinder - Remove and Install

3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test

325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)

325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2600 mm (102 inch)

325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)

SR17, SR18, SR21, SR318 and SR321 Snowblowers Reference Material

325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2000 mm (79 inch)

BB121 and BB124 AccuGrade Box Blade Storage

325C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2000 mm (79 inch)

W345B Series II Excavator Hydraulic System Specifications

325C LCR Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)

2002/04/01 New Seals in the Final Drives Reduce Oil Leaks and the Entry of Debris {7555}

325C LCR Excavator Machine System Specifications Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)