Low Idle Control
Show/hide table
| |
| Illustration 1 | g00814552 |
Push the low idle switch on the left joystick in order to lower the engine speed to LOW IDLE.
Press the low idle switch on the left joystick again in order to return the engine speed to the setting of the engine speed dial.
Caterpillar Information System:
5130B Excavator Swing Drive Oil - Change
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
305 CR Mini Hydraulic Excavator Engine Speed Control
3500B Engines Crankshaft
3500B Engines Camshaft
3064 and 3066 Engines for Caterpillar Built Machines Camshaft - Remove
2001/07/30 A New Return Spring for the Governor Motor Improves Service Life {1408}
305 CR Mini Hydraulic Excavator Alternate Exit
C15 Petroleum Generator Set Engines Electronic Unit Injector - Adjust
M312, M315, M318 and M320 Excavators Hydraulic System Relief Valve (Signal Limiter) - No Heavy Lift
3500B Engines General Information (Electronic Control System)
3500B Engines for 5130B and 5230B Excavators Ground Level Shutdown Switch
5130B Excavator Swing Bearing Bolts - Check
3064 and 3066 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
3500B Engines for 5130B and 5230B Excavators Injector Solenoids
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - M1 Series Alternator (35 Amp)
M312, M315, M318 and M320 Excavators Hydraulic System Relief Valve (Signal Limiter)
M318 Excavator Hydraulic System General Testing and Adjusting Information
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Replace
5230B Excavator Machine Electronic Control System General Information
5130B Excavator Hydraulic System Oil Level - Check
5230B Excavator Machine Electronic Control System Swing Brake Function
5130B Excavator Pump Drive Oil Level - Check
3500B Engines for 5130B and 5230B Excavators Power Shift Solenoid Circuit - Test