Relief Valve (Signal Limiter) - No Heavy Lift
Show/hide table
Illustration 1 | g00814307 |
Show/hide table
Illustration 2 | g00544128 |
Typical example (1) Main relief valve (2) Signal limiter relief valve |
The load sensing signal limits the maximum system pressure. When the load sensing signal pressure is increased, the system pressure increases.
The relief valve for the load sensing signal controls the maximum load sensing pressure that is sent to the pump controls. During normal operation, the relief valve for the load sensing signal limits the load sensing signal pressure to a maximum of 31000 ± 500 kPa (4500 ± 75 psi).
When the load sensing signal pressure is greater than the pressure setting of the relief valve for the load sensing signal, the poppet is moved upward against the spring force. Load sensing signal pressure flows to the tank.
Caterpillar Information System:
3500B Engines General Information (Electronic Control System)
3500B Engines for 5130B and 5230B Excavators Ground Level Shutdown Switch
305 CR Mini Hydraulic Excavator Cab Door - If Equipped
G3406 Engine Grounding Practices
5230B Excavator Hydraulic System Solenoid Valves (Pilot Manifold)
305 CR Mini Hydraulic Excavator Window (Front) - If Equipped
305 CR Mini Hydraulic Excavator Tool Box
3500B Engines for 5130B and 5230B Excavators Ether Injection System
305 CR Mini Hydraulic Excavator Seat
5130B Excavator Automatic Lubrication System Grease - Add
3126B Engines Fuel System - Inspect
3500 Generator Sets Fuel Injector - Inspect/Adjust
C15 Petroleum Generator Set Engines Electronic Unit Injector - Adjust
305 CR Mini Hydraulic Excavator Alternate Exit
2001/07/30 A New Return Spring for the Governor Motor Improves Service Life {1408}
3064 and 3066 Engines for Caterpillar Built Machines Camshaft - Remove
3500B Engines Camshaft
3500B Engines Crankshaft
305 CR Mini Hydraulic Excavator Engine Speed Control
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
5130B Excavator Swing Drive Oil - Change
305 CR Mini Hydraulic Excavator Low Idle Control
5130B Excavator Swing Bearing Bolts - Check
3064 and 3066 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install