Cab Door - If Equipped
Show/hide table
| |
| Illustration 1 | g01035009 |
| (1) Latch | |
Pull cab door latch (1) outward and slide the door backward in order to open the cab door. For additional ventilation, open the cab door all the way and secure the cab door to the catch.
Pull cab door latch (1) outward in order to release the cab door from the catch. Slide the door forward in order to close.
Show/hide table
| |
| Illustration 2 | g01035008 |
|
(2) Latch
(3) Latch | |
Release latch (2) or release latch (3) in order to open the side window. Slide the side window to the desired position.
Slide the side window until latch (2) or latch (3) is engaged in order to close the side window.
Caterpillar Information System:
G3406 Engine Grounding Practices
5230B Excavator Hydraulic System Solenoid Valves (Pilot Manifold)
305 CR Mini Hydraulic Excavator Window (Front) - If Equipped
305 CR Mini Hydraulic Excavator Tool Box
3500B Engines for 5130B and 5230B Excavators Ether Injection System
305 CR Mini Hydraulic Excavator Seat
5130B Excavator Automatic Lubrication System Grease - Add
3126B Engines Fuel System - Inspect
3500 Generator Sets Fuel Injector - Inspect/Adjust
2001/09/17 Correction to Serial Numbers for "Alternator Debris Guard Available" {1405}
2001/07/23 Service Magazine, SEPD0512, "Special Edition" is Available {0374}
2001/07/23 Special Instruction, REHS1064 , "Repair Procedure for the Hinge Castings of the Bulldozer on 5130 Excavators and on 5230 Excavators " {0374, 6001, 6050, 6514}
3500B Engines for 5130B and 5230B Excavators Ground Level Shutdown Switch
3500B Engines General Information (Electronic Control System)
M312, M315, M318 and M320 Excavators Hydraulic System Relief Valve (Signal Limiter) - No Heavy Lift
C15 Petroleum Generator Set Engines Electronic Unit Injector - Adjust
305 CR Mini Hydraulic Excavator Alternate Exit
2001/07/30 A New Return Spring for the Governor Motor Improves Service Life {1408}
3064 and 3066 Engines for Caterpillar Built Machines Camshaft - Remove
3500B Engines Camshaft
3500B Engines Crankshaft
305 CR Mini Hydraulic Excavator Engine Speed Control
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
5130B Excavator Swing Drive Oil - Change