Illustration 1 | g00754457 |
This cylinder is a double acting cylinder.
Cylinder stroke ... 700 mm (27.6 inch)
Operating pressure ... 35000 kPa (5076 psi)
(1) Peen the top thread in order to retain the setscrew.
Apply 4C-4030 Thread Lock Compound to the threads of the two setscrews.
(2) Diameter of the piston ring ... 219.76 ± .036 mm (8.6520 ± 0.0014 inch)
(3) Inner diameter of the cylinder ... 220.05 ± .05 mm (8.663 ± 0.002 inch)
(4) Diameter of the bushing ... 139.86 ± .02 mm (5.5063 ± 0.0008 inch)
Inner diameter of the bushing ... 124.86 ± .02 mm (4.9157 ± 0.0008 inch)
(5) Diameter of the rod ... 124.93 ± .032 mm (4.9185 ± 0.0013 inch)
(6) Inner diameter of the bushing ... 125.170 ± .032 mm (4.9279 ± 0.0013 inch)
(7) Torque on the bolts ... 300 ± 15 N·m (221 ± 11 lb ft)
Apply 4C-9506 Retaining Compound to the threads of 24 bolts (7) .
(8) Outer diameter of the bushings ... 115.09 ± .01 mm (4.5311 ± 0.0004 inch)
Inner diameter of the bushings ... 100.18 ± .04 mm (3.9441 ± 0.0016 inch)
Illustration 2 | g00730206 |
This graphic illustrates the orientation of the seals on the piston. Wear ring (9), Seal assembly (10) and Wear ring (11) |
Illustration 3 | g00730208 |
This graphic illustrates the orientation of the seals on the bushing. Backup ring (12), O-ring seal (13), Wear ring (14), Wear ring (15), Seal assembly (16), Wear ring (17), Seal assembly (18), Wiper seal (19), O-ring seal (20), O-ring seal (21) and Backup ring (22) |