Speed and Timing Sensor
Show/hide table
Illustration 1 | g00285127 |
(1) Plug with socket A, socket B, and socket C.
(2) Sensor assembly
Put clean engine oil on the O-ring seal. Put 4P-5597 Anti-seize Compound on the threads. Tighten the control assembly to the following torque. ... 40 ± 5 N·m (30 ± 4 lb ft)
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Slave Piston Lash - Adjust
3524B Engines for 797 and 797B Off-Highway Trucks Engine Oil Pressure - Test
325D and 329D Excavators Ether Starting Aid Cylinder - Replace - If Equipped
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Speed Control Valve
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Speed Control Valve
M325B Excavator Machine System Specifications Control Valve (Main)
322C Excavator Engine Oil and Filter - Change
M325B Excavator Machine System Specifications Lines (Travel Motor) - Upper
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Hydraulic Cylinder
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Hydraulic Cylinder
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Hydraulic Cylinder
M325B Excavator Machine System Specifications Lines (Heater)
320C Excavator Access Door and Cover Locations
322C Excavator Fuel System Filter - Replace
2000/11/06 Correction of the Disassembly and Assembly Manual for the Installation of the Main Hydraulic Pump and Pump Drive Coupling {5062, 5070}
2000/10/30 The Spring Seat Washer Is Now A Serviceable Component Of The Rocker Arm Cover Base Assembly {1102}
5110B Excavator Bucket Linkage - Inspect/Adjust
315C Excavator Cab Visor - If Equipped
322C Excavator Fuel System - Prime
307B Excavator VA Boom Controls
325C and 325C L Excavator Fuel System Water Separator - Drain
320C Excavator Storage Box
M325B Material Handler Power Train Travel Motor - Remove
3406E and 3456 Engines for Caterpillar Built Machines Engine Support (Front)