Illustration 1 | g00751594 |
This cylinder is a double acting cylinder.
Cylinder stroke ... 600 mm (23.6 inch)
Operating pressure ... 35000 kPa (5076 psi)
(1) Peen the top thread in order to retain the setscrew.
Apply 4C-4030 Thread Lock Compound to the threads of the two setscrews.
(2) Diameter of the piston ring ... 179.85 ± .035 mm (7.0807 ± 0.0014 inch)
(3) Inner diameter of the cylinder ... 181.01 ± .036 mm (7.1264 ± 0.0014 inch)
(4) Diameter of the rod ... 109.94 ± .027 mm (4.3283 ± 0.0011 inch)
(5) Inner diameter of the bushing ... 110.17 ± .027 mm (4.3374 ± 0.0011 inch)
(6) Torque on the bolts ... 300 ± 15 N·m (221 ± 11 lb ft)
Apply 4C-9506 Retaining Compound to the threads of 16 bolts (6) .
(7) Outer diameter of the bushings ... 114.88 ± .02 mm (4.5228 ± 0.0008 inch)
Inner diameter of the bushings ... 99.88 ± .02 mm (3.9323 ± 0.0008 inch)
(8) Outer diameter of the bushings ... 105.09 ± .011 mm (4.1374 ± 0.0004 inch)
Inner diameter of the bushings ... 90.1795 ± .0435 mm (3.5504 ± 0.0017 inch)
Illustration 2 | g00730206 |
This graphic illustrates the orientation of the seals on the piston. Wear ring (9), Seal assembly (10) and Wear ring (11) |
Illustration 3 | g00730208 |
This graphic illustrates the orientation of the seals on the bushing. Backup ring (12), O-ring seal (13), Wear ring (14), Wear ring (15), Seal assembly (16), Wear ring (17), Seal assembly (18), Wiper seal (19), O-ring seal (20), O-ring seal (21) and Backup ring (22) |