Inlet and Exhaust Valve Seat Inserts - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 9S-3095     | 拉拔器手柄     | 1     |
B     | 6V-4194 (1)     | 气门座拔取器     | 1     |
1U-9167 (2) | 气门座拔取器     | 1     |
Show/hide table
( 1 ) | 结合排气气门座使用 |
( 2 ) | 结合进气气门座使用 |
开始:
- 拆卸进气与排气阀。 请参阅拆解和组装, "进气阀与排气阀 - 拆卸和安装"。
- 使用工具 (A) 和工具 (B) ,拆下气门座镶圈 (1) 。
Show/hide table
图 1 | g01137634 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
C     | 4C-6372 (1)     | 气门座冲头     | 1     |
364-4009 (2) | 气门座冲头     | 1     |
Show/hide table
( 1 ) | 结合排气气门座使用 |
( 2 ) | 结合进气气门座使用 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 降低新气门座镶圈 (1) 的温度。 使用工具 (C) ,在缸盖中安装气门座镶圈 (1) 。
Show/hide table
图 2 | g01137637 |
注: 不要为了纠正气门杆突出而加工已经加工好的气门座镶圈。 气门杆突出说明气门座镶圈没有安装到位或镗孔底部残渣未清理干净。
End By: 安装进气阀和排气阀。 请参阅 拆解和组装, "进气阀与排气阀 - 拆卸和安装"。
Caterpillar Information System:
345B, 345B Series II and W345B Series II Excavators Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Remove
SR500 Generators Bearing (Spherical Roller) - Lubricate
307B Excavator Machine System Specifications Lines (Front) - Common Piping
307B Excavator Hydraulic System Pilot Hydraulic System
777D HAA Off-Highway Truck Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
C9 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
307B Excavator Machine System Specifications Lines (Front) - Single Action (1 Pump)
777D HAA Off-Highway Truck Engine Components - Rebuild/Install Reman
325B Excavator Machine Systems Heating and Air Conditioning Unit - Remove
307B Excavator Machine System Specifications Lines (Front) - 2 Pumps Flow
325B Excavator Machine Systems Heating and Air Conditioning Unit - Install
M318 and M320 Excavators Machine Electronic Control System Implement Activation
C-9 Engines for Caterpillar Built Machines Unit Injector
345B, 345B Series II and W345B Series II Excavators Machine Systems Cab Lighting - Remove and Install
3056 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Lighting (Chassis) - Remove and Install
325B Excavator Machine Systems Water Valve (Cab Heater) - Remove and Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Sprocket - Remove and Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Final Drive and Travel Motor - Remove
345B, 345B Series II and W345B Series II Excavators Machine Systems Final Drive and Travel Motor - Install
5230 Excavator Service Hour Meter
307B Excavator Electrical And Electronic System General Information
C-9 Engines for Caterpillar Built Machines Front Housing and Covers